Dr. Mohammad, Sheikhshab Bafghi

Personal Details

NAME: Mohammad

SURNAME: Sheikhshab Bafghi

Year of Birth: 1955

ACCADEMIC STATUS: Professor, School of Metallurgy & Materials Engineering, Iran University of Science and Technology (IUST), Since March 1994

Fields of Research Interests:

Metals extraction and refining Processes, Materials reclamation, New methods of materials synthesis, Chemical Metallurgy

Educational Records

Teaching Experiences:

• Principles of Extractive Metallurgy 2 (Non)Ferrous Metals)
• Kinetics of Metallurgical Reactions
• Advanced Kinetics
• Advanced Hydrometallurgy
• Electrometallurgy

  Publications

  Barqi, J. , Masoudpanah, S.M. , Liu, X. , Sh. Bafghi, M. , Ong, C.K., " Fabrication of porous Cu2S nanosheets for high performance hybrid supercapacitor", Journal of Energy Storage, 2022, 45, 103781

  Marand, N.A. , Masoudpanah, S.M. , Alamolhoda, S. , Bafghi, M.S., " Solution combustion synthesis of nickel sulfide/reduced graphene oxide composite powders as electrode materials for high-performance supercapacitors, Journal of Energy Storage, 2021, 39, 102637

  S.M.R. Bavar, S. Alamolhoda*, M. Sh Bafghi, S.M. Masoudpanah, "Photocatalytic performances of cobalt sulfides prepared by solution combustion synthesis using mixed fuels" Journal of Physics and Chemistry of Solids, 2021

  J. Barqi1, S. M. Masoudpanah1, M. Sh. Bafghi, "Facile synthesis of plate-like copper sulfide powderas an electrode material for high-performancesupercapacitors, J Mater Sci: Mater Electron, 31:17614–17623, 2020

  Bilesan M. R., Soltanieh. M, S. M. Bafghi, Repo E., "Evaluation of Li Electrodeposition into Al from LiCl-KCl Electrolyte", SURFACE ENGINEERING AND APPLIED ELECTROCHEMISTRY, 2020

  Ardebilchi Marand, N., Masoudpanah, S.M., Bafghi, M.S., Alamolhoda, S., "Photocatalytic Activity of Nickel Sulfide Composite Powders Synthesized by Solution Combustion Method", Journal of Electronic Materials, 2020

  Ardebilchi Marand, N., Masoudpanah, S.M., Bafghi, M.S, "Solution combustion synthesis of nickel sulfide composite powders", Ceramics International44(14), pp. 17277-17282.

  S. Famenin Nezhad Hamedani, S. M. Masoudpanah, M. Sh. Bafghi, N. Asgharinezhad Baloochi, "Solution combustion synthesis of CoFe2O4 powders using mixture of CTAB and glycine fuels", Jorunal of Sol-Gel Science and Technology, 2018, 86, 743-750

  BEHNAMI, A.K., SAKAKI, M., BAFGHI, M.S., YANAGISAWA, K, "Facile microwave-assisted fabrication of WC-Al2O3composite powder from WO3-Al-C mixture", Transactions of Nonferrous Metals Society of China (English Edition), 2017

  Behnami, A.K., Hoseinpur, A., Sakaki, M., Bafghi, M.S., Yanagisawa, K., "Synthesis of WC powder through microwave heating of WO3–C mixture", International Journal of Minerals, Metallurgy and Materials, Volume 24, Issue 2, 1 February 2017, Pages 202-20

  Ghanbari, A.Sakaki, M., Faeghinia, A., Bafghi, M.Sh., Yanagisawa, K., "Synthesis of nanocrystalline TiB2 powder from TiO2, B2O3 and Mg reactants through microwave-assisted self-propagating high-temperature synthesis method", Bulletin of Materials Science, Volume 39, Issue 4, August 2016, Pages 925-933

  A. Hoseinpour, M. Jalali, M. Sh. Bafghi, J. Vahdati Khaki, M. Sakaki, "The effect of preliminary mechanical activation on the zinc loss control in combustive reduction of MoO3 by Zn", INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 54, 2016, 251-259

  A. Hoseinpour, M. Jalali, M. Sh. Bafghi, J. Vahdati Khaki, "On the formation of Mo2C nanocrystals by a novel system through microwave assisted combustion synthesis", MATERIALS CHARACTERIZATION, 108, 2015, 79-84

  Arman Hoseinpur, Mohammad Sh. Bafghi, Jalil Vahdati Khaki, Maisam Jalaly, Masoud Sakaki, A mechanistic study on the production of nanosized Mo in microwaveassisted combustive reduction of MoO3 by Zn, Int. Journal of Refractory Metals and Hard Materials 50 (2015) 191–196.

  Shaker, E.a , Sakaki, M.b, Jalaly, M.c, Bafghi, M.S.a, "Microwave synthesis of B4C-Al2O3 composite in a mechanically activated Al/B203/C powder mixture ", Iranian Journal of Materials Science and EngineeringVolume 12, Issue 4, December 2015, Pages 89-99

  Jalaly, M.a , Bafghi, M.S.-S.a, Tamizifar, M.a, Gotor, F.J.b, "In situ synthesis of a ZrB 2 -based composite powder using a mechanochemical reaction for the zircon/magnesium/boron oxide/graphite system", International Journal of Applied Ceramic Technology, Volume 12, Issue 3, 1 May 2015, Pages 551-559

  Sakaki, M.a , Bafghi, M.Sh.b, Vahdati Khaki, J.c , "Effect of heat absorbing alumina addition on mechanochemical synthesis of WC-Al2O3 nanocomposites", Advances in Applied CeramicsVolume 114, Issue 3, 1 April 2015, Pages 144-149

  M. Jalali, M. Sh. Bafghi, M. Tamizifar, F. J. Gotor, "The role of boron oxide and carbon amounts in the mechanosynthesis of ZrB2-SiC-ZrC nanocomposite via a self-sustaining reaction in the zircon/magnesium/boron oxide/graphite system", Journal of alloys and compounds, 598, 2014, 113-119.

  M. Sakaki, A. Karimzadeh Behnami, M. Sh. Bafghi, "An Investigation of the fabrication of tungsten carbide-alumina composite powder from WO3, Al and C reactants through microwave-assisted SHS process", International Journal of Refractory Metals and Hard Materials, 44, 2014, 142-147

  M. Jalaly, M. Sh. Bafghi, M. Tamizifar, F. J. Gotor, "An investigation on the formation mechanism of nano ZrB2 powder by a magnesiothermic reaction", Journal of Alloys and Compounds, 588, 2014, 36-41

  M. Sh. Bafghi, F. Feiz, M. Sakaki, "A Parametric study on the Sulfuric Acid leaching of Vanadium of an Iranian thermal powder plant ASH", Iranian Journal of Materials Science & Engineering vol. 11, No. 1, 2014

  M. Sh. Bafghi a, M. Sakaki b, J. Vahdati Khaki c, Q. Zhang d, F. Saito, "Evaluation of process behavior and crystallite specifications of mechano-chemically synthesized WC–Al2O3 nano-composites", Materials Research Bulletin, 49, 2014, 160-166

  M. Jalaly, M. Tamizifar, M. Sh. Bafghi, F. J. Gotor, "Mechanochemical synthesis of ZrB2-SiC-ZrC nanocomposite powder by metallothermic reduction of zircon", Journal of Alloys and Compounds, 581, 2013, 782-787

  M. Sh. Bafghi, M. Karimi, M. Adeli, "A kinetic study on the carbothermic reduction of zinc oxide from electric arc furnace dust", Iranian Journal of Materials Science & Engineering, 2013

  M. Jalaly, M. Sh. Bafghi, M. Tamizifar, F. J. Gotor, "Formation mechanism of ZrB2-Al2O3 nanocomposite powder by mechanically induced self-sustaining reaction", J. Mater Sci, 2013, 48: 7557-7567

  M. S. Bafghi, A. Zakeri A. H., Emami, "Effect  of specific surface Area of a Mechanically Activated Chalcopyrite on its rate of  leaching in sulfuric Acid-Ferric Sulfate Media", Metallurgical and Materials Transctions B, 1166-1172, vol. 44B, Oct. 2013

  M. Jalali, M. Sh. Bafghi, M. Tamizifar, F.J Gotor, "Mechanosynthesis of nanocrystalline ZrB2-Based powders by mechanically induced self-sustaining reaction method", Advances in Applied Ceramics : Structural, Functional and Bioceramics, vol. 112, no. 7, pp. 383-388, 2013

  M. Sakaki, M. Sh. Bafghi, J. Vahdati Khaki, Q. Zhang, F. Saito, "Conversion of W2C to WC phase during mechano-chemical synthesis of nano-size WC-Al2O3 powder using WO3-2Al-(1+x)C mixtures", International Journal of Refractory Metals and Hard Materials, 36, 2013, 116-121

  M. Aghazadeh, A. Zakeri, M. Sh. Bafghi, "Modeling and optimization of surface quality of Copper deposits recovered from brass scrap by direct electrowinning", Hydrometallurgy, pp. 103-108, 2012

  M. Sh. Bafghi, A. Yarahmadi, A. Ahmadi, H. Mehrjoo, "Effect of the type of Carbon material on the reduction kinetics of Barium Sulfate", Iranian Journal of materials science & engineering, vol. 8, No. 3, 2011

  M. S. Bafghi, A. H. Emami, A. Zakeri, J. Vahdati Khaki, "Effect of mechanical activation on the kinetics of leaching of chalcopyrite in the ferric sulfate media", Iranian Journal of materials science & engineering, vol. 7, No. 2, Spring 2010.

  M.S. Bafghi, A.H. Emami, A. Zakeri, J. Vahdati Khaki, " Development and verification of a mathematical model for variations of the specific surface area of mineral powders during intensive milling", Powder Technology 197, 2010, pp. 87-90

  M. Sakaki, M.S. Bafghi, J. Vahdati Khaki, Q. Zhang, and F. Saito, " Control of carbon loss during synthesis of WC powder through ball milling of WO3-C-2Al mixture ", Journal of Alloys and Compounds 486, 2009, pp. 486-491

  M.S. Bafghi, A.R. Asghari, A. Zakeri, S. H. Seyedein, " Removal of silicon impurity from molten brass using an innovative ZnO-containing slag", Materials and Minerals Transactions B, 40, 2009, pp. 749-754. doi:10.1007/s11663-009-9280-9

  M. Sakaki, M.S. Bafghi, J. Vahdati Khaki, Q. Zhang, J. Kano, F. Saito, "Effect of Aluminum content on the behavior of mechanochemical reactions in the WO3-C-Al system", Journal of Alloys and Compounds 480, 2009, pp. 824-829

  M.S. Bafghi, A.H. Emami, J. Vahdati Khaki, A. Zakeri. " Development of a mathematical expression for the variation of amorphization phenomenon during intensive milling of minerals", International J. of Mineral Processing , 2009, pp. 149-154 doi:10.1016/j.minpro.2009.07.008

  A.H. Emami, M.S. Bafghi, J. Vahdati Khaki, A. Zakeri, " The effect of grinding time on the specific surface area during intensive grinding of mineral powders", Iranian Journal of Materials Science and Engineering , Vol. 6, No. 2, Spring 2009, pp. 30-36 Abstract

  M.S. Bafghi, A. Zakeri, Z. Ghasemi, M. Adeli, " Reductive dissolution of manganese ore in sulfuric acid in the presence of iron metal ", Hydrometallurgy 90, 2008, PP. 207-212 doi:10.1016/j.hydromet.2007.07.003

  M. sadegh Safarzadeh, M.S. Bafghi, D. Moradkani, M. Ojaghi Ilkhchi, "A review on hydrometallurgical extraction and recovery of cadmium from various resources ", Minerals Engineering 20, 2007, pp. 211-220

  A. Beitollahi, M.S. Bafghi, S. M. Jazayeri Dezfouli, H. Ghanbari, " Synthesis and characterization of nm-sized PbTiO3 crystallites", Mater Electron, 2006, pp. 361-365

  N. Shaigan, S.N. Ashrafizadeh, M. S. Bafghi, S. Rastegari, " Elimination of the corrosion of Ni-P substrates during electrolysis of gold plating" , Journal of the Electronical Society, 2005

  A. Zakeri, M. Sh. Bafghi, Sh. Shahriari, " Dissolution kinetics of manganese dioxide ore in sulfuric acid in the presence of ferrousion", Iranian Journal of Materials Science and Engineering , Vol. 4, No. 3 and 4, Summer and Autumn, 2004, pp. 22-27

  M.S. Bafghi, M. Adeli, H. Mohammadi Nikoo, "Kinetics of carbothermic reductions of an Iranian Celestine ore ", Iranian Journal of Materials Science and Engineering, Vol. 1, No. 3, Summer 2004, pp. 28-33

  J. Vahdati. Khaki, M. Panjehpour, Y. Kashiwaya, K. Ishii, M.S. Bafghi. " A Study of the effect of Aluminium on the mechanochemical Reduction of Hematite by Graphite", 2004, Steel Research Int. 75, No. 3, pp. 169-177

  M.S. Bafghi, S. N. Ashrafizadeh, A. Hassani, " Pressure leaching of an Iranian Zinc sulfide concentrate ", International Journal of Engineering Science, Vol. 13, No. 2 2001-2002, pp. 37-49

  ---

  M. R. Sistanehei, M. Sh. Bafghi, A. Zakeri, "Arsenic separation from arsenic-copper solution via electrowining", 7th International Chemical Congress & Exihibition, Iran, 2011

  M. Mizani, A. Zakeri, M.S. Bafghi, "Acid Leaching of Chalcopyrite Concentrate in the Presence of Manganese Dioxide by Oxidative-Reductive Route", Bio and Hydrometallurgy ‘09, 2009

  S. Moradi, M.S. Bafghi. J.V. Khaki, "Effect of leaching factors and mechanical activation on chalcopyrite leaching in acidic ferric Sulfate", The 11th International Mineral Processing Symposium, 2008, pp. 499-505

  R. Sani, A. Beitollahi, Yu.V. Maksimov, I.P. Suzdalev, M.S. Bafghi, “Synthesis and characterization of CoFe2O4 nanoparticles prepared by high energy milling”, 1st Iran-Russia, 2005

  S.N. Ashrafizadeh, M.S. Bafghi, R. Shahbazi , M.R. Hossein, "Recovery of Cobalt and Tungsten from scrap carbide", 5th Int. Conf. on Hydrometallurgy , 2003, pp. 1605-1615