دانشکده مهندسی صنایع- دکتر محمدرضا محمد علیها
شرح حال علمی

حذف تصاویر و رنگ‌ها

" محمد رضا محمد علیها "

دانشیار

عضو گروه مهندسی صنایع

Email : mrm_aliha AT iust.ac.ir

تلفن داخلی: 5031 - 7322
آزمایشگاه مجازی

AWT IMAGE

AWT IMAGEسوابق آموزشیAWT IMAGE

تحصیلات دانشگاهی

• دکترای مهندسی مکانیک، رشته تحصیلی طراحی کاربردی، محل تحصیل ایران، تاریخ اخذ:1388

• فوق لیسانس مهندسی مکانیک ، رشته تحصیلی هوا فضا، محل تحصیل ایران، تاریخ اخذ:1382

• لیسانس مهندسی مکانیک ،رشته تحصیلی جامدات، محل تحصیل ایران، تاریخ اخذ:1380

زمینه های تخصصی و تحقیقاتی

1- مکانیک شکست تحلیلی، عددی و تجربی

2- ارزیابی تخریب و واماندگی سازه ها

3-تستهای غیر مخرب و بررسی استحکام سازه های جوش کاری شده
4- کنترل کیفیت و بهینه‌سازی‌

سوابق شغلی

• عضو هیات علمی، دانشکده مهندسی صنایع ، دانشگاه علم و صنعت ایران، از سال 1388 تا کنون

• تدریس در دانشگاه های علم و صنعت و آزاد اسلامی (واحدهای علوم تحقیقات، شهر ری تهران سما و تهران غرب) از سال 1382 تا کنون

سوابق تدریس دانشگاهی

• استاتیک، مقاومت مصالح، روشهای تولید I، کارگاه ماشین افزار، کارگاه جوش – دانشکده صنایع، دانشگاه علم و صنعت ایران

• آزمایشگاه مقاومت مصالح، نرم افزار های المان محدود – دانشکده مکانیک، دانشگاه علم و صنعت ایران

• مقاومت مصالح، روشهای تولید I- واحد آموزشهای مجازی، دانشگاه علم و صنعت ایران

• آزمایشگاه مقاومت مصالح– واحد دماوند ، دانشگاه علم و صنعت ایران

• تدریس در دانشگاه علم و صنعت ایران – دانشکده صنایع – از سال 1382 به بعد

• نقشه کششی صنعتی 1و2 ،استاتیک، مقاومت مصالح، زبان تخصصی – دانشگاه آزاد اسلامی، واحدهای علوم تحقیقات، شهر ری، تهران غرب و تهران سما

AWT IMAGEسوابق پژوهشیAWT IMAGE

مقالات منتشر شده در مجلات بین المللی ( ISI,ISC )

 2023

1. Wu, J., Wang, H., Mao, L., & Aliha, M. R. M.* (2023). Composition optimization of PMMA base denture reinforced with different percentages of Nano Hydroxyapatite and alumina particles to obtain highest KIc and KIIc values using hybrid IWO/PSO algorithm. Theoretical and Applied Fracture Mechanics, 104090.
 

2. Solouki, A., Aliha, M. R. M.* & Makui, A., (2023). Comparison of flexural strength in rectangular shape 3D-printed PLA samples with different grooves; In Persian, Journal of Science and Technology of Composites, Vol. 10, No. 2, pp. 2210-2217, 2023. https://doi.org/10.22068 /JSTC.2023.2005499.1841.
 

3. Zhigang Shan, Liuyuan Zhao, Weida Ni, Jie Wu, Fang Zhang, M.R.M. Aliha. (2023), 3D numerical analysis of stability and onset of hydraulic fracture in the vertical-oblique-horizontal wells under wide range of in-situ stresses; Fatigue and Fracture of Engineering Materials and Structures
 

4. Aliha, M. R. M.*., Zalnejad, M.  & Haghighatpour, P. J., (2023). Fracture Toughness of Colored Slurry Seal at Low Temperatures and Different Loading Modes: Comparative Study with Warm and Hot Mix Asphalt Materials; Construction and Building Materials.
 

5. Bazoobandi, P., Karimi, H. R., Mousavi, S. R., Karimi, F., & Aliha, M. R. M. (2023). Full range of mode I and II cracking performance of asphalt mixtures containing low to high reclaimed asphalt pavement (RAP) contents, modified by recycling agent and substituting of a softer binder. Case Studies in Construction Materials, e02487.
 

6. Solouki, A., Aliha, M. R. M., Makui, A., & Choupani, N. (2023). Analyzing the effect of notch geometry on the impact strength of 3D-printed specimens. Materials Testing, (0). https://doi.org/10.1515/mt-2023-0088.
 

7. Ghoroghi, S. S., Haghighatpour, P. J., Aliha, M. R. M.*, & Berto, F. (2023). Comparative cracking resistancecost study for the hot mix asphalt (HMA) mixtures made of natural and recycled asphaltic materials. Fatigue & Fracture of Engineering Materials & Structures.
 

8. Asadi, P., Akbari, M., Armani, A., Aliha, M. R. M., Peyghami, M., & Sadowski, T. (2023). Recycling of brass chips by sustainable friction stir extrusion. Journal of Cleaner Production, 138132
 

9.Aliha, M. R. M.*, Kosarneshan, K., Salehi, S. M., Haghighatpour, P. J., & Mousavi, A. (2023). On the Statistical Prediction of KIc and GIc for Railway Andesite Ballast Rock Using Different Three-Point Bend Disc Samples. Rock Mechanics and Rock Engineering, 1-22.
 

10. Gu, X., Cheng, T., Zhang, F., & Aliha, M. R. M. Experimental and theoretical framework for illustrating the dependency of fracture toughness with tensile, bending, and compression loading in asphaltic samples. Fatigue & Fracture of Engineering Materials & Structures.
 

11. Karimi, H. R, Bidadi, J., Aliha, M. R. M.*, Mousavi, A., Mohammadi, M. H., & Haghighatpour, P. J. (2023). An experimental study and theoretical evaluation on the effect of specimen geometry and loading configuration on recorded fracture toughness of brittle construction materials. Journal of Building Engineering, 75, 106759.
 

12. Aliha, M. R. M.*., Nazemzadeh, N., Ghoreishi, S. M. N., & Kafshgar, A. R. (2023). The impact of sterilization, body environment condition and raster orientation on tensile-shear cracking of sub-sized 3D printed specimens. Theoretical and Applied Fracture Mechanics, 103953.
 

13. Ahmadpour Kasgari S., Aliha, M. R. M.*, Sajadi S. J., Sadowski T. & Berto F. (2023), Progress in Friction Stir Welding of Polymer and Aluminum Alloys. Mechanics of Composite Materials.
 

14. Akbari, M., Asadi, P., Aliha, M. R. M., & Berto, F. (2023). Modeling and Optimization of Process Parameters of the Piston Alloy-Based Composite Produced by Fsp Using Response Surface Methodology. Surface Review and Letters, 30(06), 2350041.
 

15. Najjar, S., Moghaddam, A. M., Sahaf, A., & Aliha, M. R. M. (2023). Mixed mode (I&III) fracture behavior of cement emulsified asphalt mortar under freeze and thaw cycles. Theoretical and Applied Fracture Mechanics,126, 10395.
 

16.Omidvar, N., Aliha, M. R. M.*., & Khoramishad, H. (2023). Hygrothermal degradation of MWCNT/epoxy brittle materials under I/II combined mode loading conditions: An experimental, micro structural and theoretical study. Theoretical and Applied Fracture Mechanics, 125, 103896.
 

17.Asadi, P., Akbari, M., Talebi, M., Peyghami, M., Sadowski, T., & Aliha, M. R. M. (2023). Production of LM28 Tubes by Mechanical Alloying and Using Friction Stir Extrusion. Crystals, 13(5), 814.
 

18.Akbari, M., Asiabaraki, H. R., & Aliha, M. R. M. (2023). Investigation of the effect of welding and rotational speed on strain and temperature during friction stir welding of AA5083 and AA7075 using the CEL approach. Engineering Research Express, 5(2), 025012.
 

19.Khademi-kouhi, M., Ghasemi Ghale-Bahmanmi Ghale-Bahman, A., Farrokh Abadi, A., Aliha, M. R. M, & Jedi, M. (2023). Analysis and investigation of the effect of the Lay-up of layers and angles of fibers on the vibration behavior of FML cylindrical shells of on Pasternak elastic foundation with different boundary conditions. Journal of Vibration and Sound, 11(22), 38-48.
 

20. Karimi, H. R., Aliha, M. R. M.*, Khedri, E., Mousavi, A., Salehi, S. M., Haghighatpour, P. J., & Ebneabbasi, P. (2023). Strength and cracking resistance of concrete containing different percentages and sizes of recycled tire rubber granules. Journal of Building Engineering, 67, 106033
 

21.Shaker, H., Ameri, M., Aliha, M. R. M., & Rooholamini, H. (2023). Evaluating Low-Temperature fracture toughness of steel slag Aggregate-Included asphalt mixture using response surface method. Construction and Building Materials, 370, 130647.
 

22.Karimi, H. R., Khedri, E., Aliha, M. R. M.*, Shaker, H., & Haghighatpour, P. J. (2023). Repair efficiency evaluation for cracked asphalt mixture pavement in different ambient temperatures using bitumen and polymer concrete as repair materials. Construction and Building Materials, 369, 130556
 

23.Daneshfar, M., Hassani, A., Aliha, M. R. M., Sadowski, T., & Karimi, A. (2023). Experimental Model for Study of Thickness Effect on Flexural Fatigue Life of Macro-Synthetic-Fiber-Reinforced Concretes. Buildings, 13(3), 642.
 

24.Ziari, M. A., Moghadas Nejad, F., Mohammad Aliha, M. R., & Hajikarimi, P. (2023). Low-Temperature Fracture Characteristics of Reclaimed Asphalt Pavement Modified with crumb rubber and rejuvenator. Journal of Transportation Infrastructure Engineering, 8(4), 1-10.
 

25.Keymanesh, M. R., Mohammad Aliha, M. R., & Mehdizadeh, G. (2023). Evaluation of the Effect of Nano-Organosilane Zycotherm and Deviation of Aggregate Gradation on Aphallt Film Thickness and Moisture Sensitivity of Hot Mix Asphalt. Civil Infrastructure Researches, 8(2), 37-55.
 

26. Karimi, H. R., Aliha, M. R. M.*, Ebneabbasi, P., Salehi, S. M., Khedri, E., & Haghighatpour, P. J. (2023). Mode I and mode II fracture toughness and fracture energy of cement concrete containing different percentages of coarse and fine recycled tire rubber granules. Theoretical and Applied Fracture Mechanics, 123, 103722
 

27. Ameri, B., Taheri-Behrooz, F., Majidi, H. R., & Mohammad Aliha, M. R. (2023). Mixed-mode load bearing estimation of the cracked additively manufactured materials using stress/strain-based models. Rapid Prototyping Journal, 29(2), 218-231
 

28. Pietras, D., Aliha, M. R. M.*, Kucheki, H. G., & Sadowski, T. (2023). Tensile and tear-type fracture toughness of gypsum material: Direct and indirect testing methods. Journal of Rock Mechanics and Geotechnical Engineering. 15(7), 1777-1796.
 

29.Daneshfar, M., Hassani, A., Aliha, M. R. M., & Sadowski, T. (2023). Assessment of the Specimen Size Effect on the Fracture Energy of Macro-Synthetic-Fiber-Reinforced Concrete. Materials, 16(2), 673.
 

30.Mehri Khansari, N., & Aliha, M. R. M.* (2023). Mixed-modes (I/III) fracture of aluminum foam based on micromechanics of damage. International Journal of Damage Mechanics, 10567895221143809
 

31.Akbari, M., Aliha, M. R. M., & Berto, F. (2023). Investigating the role of different components of friction stir welding tools on the generated heat and strain. Forces in Mechanics, 100166.
 

32.  Shahebrahimi, S., Mahdad, M., Aliha, M. R. M. .*, & Naeini, A. B. (2023). Transfer of Space Technologies in Iran: Drivers and Constraints of Success. Space Policy, 64, 101518.

2022

33.  Shahbazian, B., Mirsayar, M. M., Aliha, M. R. M., Darvish, M. G., Asadi, M. M., & Haghighatpour, P. J. (2022). Experimental and theoretical investigation of mixed-mode I/II and I/III fracture behavior of PUR foams using a novel strain-based criterion. International Journal of Solids and Structures, 258, 111996.
 

34.  Omidvar, N., Khoramishad, H., & Aliha, M. R. M. (2022). Investigation of the deleterious effects of low-temperature and hygrothermal aging conditions on the mixed-mode fracture resistance of epoxy resin using a short-beam bend specimen. Theoretical and Applied Fracture Mechanics, 121, 103539.
 

35.  Karimi, H. R., Khedri, E., Aliha, M. R. M.*, & Mousavi, A. (2022). A comprehensive study on ring shape specimens under compressive and tensile loadings for covering the full range of I+ II fracture modes of gypsum material. International Journal of Rock Mechanics and Mining Sciences, 160, 105265.
 

36.  Najjar, S., Moghaddam, A. M., Sahaf, A., & Aliha, M. R. M. (2022). Experimental and statistical exploring for mixed-mode (I&II) fracture behavior of cement emulsified asphalt mortar under freeze–thaw cycles and aging condition. Theoretical and Applied Fracture Mechanics, 122, 103643.
 

37.  Bidadi, J., Aliha, M. R. M.*, & Akbardoost, J. (2022). Development of maximum tangential strain (MTSN) criterion for prediction of mixed-mode I/III brittle fracture. International Journal of Solids and Structures, 256, 111979.
 

38.  Daneshfar, M., Hassani, A., Aliha, M. M., & Berto, F. (2022). Investigating Flexural Performance of Fiber-Reinforced Concrete with Different Contents and Types of Macrosynthetic Fiber. Strength of Materials, 1-12.
 

39.  Imani, D. M., Mohammad Aliha, M. R., Rajabi Kafshgar, A., & Shojaee, M. (2022). The use of Taguchi method for mix-design optimization of polymer concrete with high resistance against mode I crack growth. Journal of Science and Technology of Composites, 9(1), 1892-1885.
 

40.  Haghighatpour, P. J., & Aliha, M. R. M.* (2022). Assessment of freezing and thawing cycle (FTC) effects on mixed mode I/III fracture toughness and work of fracture of HMA asphalt mixtures. Theoretical and Applied Fracture Mechanics, 118, 103261.
 

41.  Karamzadeh, N. S., Aliha, M. R. M., & Karimi, H. R. (2022). Investigation of the effect of components on tensile strength and mode-I fracture toughness of polymer concrete. Arabian Journal of Geosciences, 15(13), 1213.
 

42.  Asadi, P., Aliha, M. R. M.*, Akbari, M., Imani, D. M., & Berto, F. (2022). Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method. Engineering Failure Analysis, 140, 106528.
 

43.  He, J., Liu, L., Yang, H., & Aliha, M. R. M.* (2022). Using two and three-parameter Weibull statistical model for predicting the loading rate effect on low-temperature fracture toughness of asphalt concrete with the ENDB specimen. Theoretical and Applied Fracture Mechanics, 121, 103471.
 

44.  Ziari, H., Aliha, M. R. M.*, Fard, E. S., & Sarbijan, M. J. (2022). Mixed mode I+ II fracture parameters and cracking trajectory of heterogeneous multilayer pavement structure containing reflective crack. Fatigue & Fracture of Engineering Materials & Structures, 45(10), 2958-2977.
 

45.  He, J., Liu, L., Yang, W., & Aliha, M. R. M.* (2022). Influence of testing method on mode II fracture toughness (KIIc) of hot mix asphalt mixtures. Fatigue & Fracture of Engineering Materials & Structures, 45(10), 2940-2957.
 

46.  Aliha, M. R. M.*, reza Karimi, H., & Ghoreishi, S. M. N. (2022). Design and validation of simple bend beam specimen for covering the full range of I+ II fracture modes. European Journal of Mechanics-A/Solids, 91, 104425.
 

47.  Saed, S. A., Karimi, H. R., Rad, S. M., Aliha, M. R. M.*, Shi, X., & Haghighatpour, P. J. (2022). Full range I/II fracture behavior of asphalt mixtures containing RAP and rejuvenating agent using two different 3-point bend type configurations. Construction and Building Materials, 314, 125590.
 

48.  Aliha, M. R. M.*, reza Karimi, H., & Abedi, M. (2022). The role of mix design and short glass fiber content on mode-I cracking characteristics of polymer concrete. Construction and Building Materials, 317, 126139.
 

49.  Imani, D. M., Aliha, M. R. M., Linul, E., & Marsavina, L. (2022). A suitable mixed mode I/II test specimen for fracture toughness study of polyurethane foam with different cell densities. Theoretical and Applied Fracture Mechanics, 117, 103171.
 

50.  Wen, X., Feng, L., Yin, G., Liang, Q., Aliha, M. R. M.*, & Haghighatpour, P. J. (2022). Relationship between low-temperature KIc and KIIc values of bitumen with different performance grades and comparison with naturally solid materials. Theoretical and Applied Fracture Mechanics, 117, 103169.
 

51.  Haghighatpour, P. J., & Aliha, M. R. M.* (2022). Effect of marshal and gyratory compaction methods on cracking characteristics of hot mix asphalt concrete materials under all three basic modes of fracture. Theoretical and Applied Fracture Mechanics, 117, 103207.
 

52.  Ameri, B., Taheri-Behrooz, F., & Aliha, M. R. M. (2022). Mixed-mode tensile/shear fracture of the additively manufactured components under dynamic and static loads. Engineering Fracture Mechanics, 260, 108185.
 

53.  Aliha, M. R. M.*, Haghighatpour, P. J., & Tavana, A. (2022). Application of asymmetric semi-circular bend test for determining mixed mode I+ II fracture toughness of compacted soil material. Engineering Fracture Mechanics, 262, 108268.
 

54.  Hajiloo, H. R., Karimi, H. R., Aliha, M. R. M.*, Zanjirani Farahani, H., Salehi, S. M., Hajiloo, M., & Jafari Haghighatpour, P. (2022). Crack resistance of fiberreinforced asphalt mixtures: Effect of test specimen and test condition. Fatigue & Fracture of Engineering Materials & Structures, 45(3), 921-937.
 

55.  Haghighatpour, P. J., & Aliha, M. R. M.* (2022). Assessment of freezing and thawing cycle (FTC) effects on mixed mode I/III fracture toughness and work of fracture of HMA asphalt mixtures. Theoretical and Applied Fracture Mechanics, 118, 103261.
 

56.  Najjar, S., Moghaddam, A. M., Sahaf, A., & Aliha, M. R. M. (2022). Aging effect on the mixed-mode (I/III) fracture toughness of cement emulsified asphalt composite: Experimental and statistical investigation. Engineering Fracture Mechanics, 264, 108292.
 

57.  Tutluoglu, L., Batan, C. K., & Aliha, M. R. M.* (2022). Tensile mode fracture toughness experiments on andesite rock using disc and semi-disc bend geometries with varying loading spans. Theoretical and Applied Fracture Mechanics, 119, 103325.
 

58.  Aliha, M. R. M.*, Imani, D. M., Salehi, S. M., Shojaee, M., & Abedi, M. (2022). Mixture optimization of epoxy base concrete for achieving highest fracture toughness and fracture energy values using Taguchi method. Composites Communications, 32, 101150.
 

59.  Asadi, P., Aliha, M. R. M.*, Akbari, M., Imani, D. M., & Berto, F. (2022). Multivariate optimization of mechanical and microstructural properties of welded joints by FSW method. Engineering Failure Analysis, 106528.
 

60.  Keymanesh, M. R., Mohammad Aliha, M. R., & Mehdizadeh, G. (2022). Evaluation of the Effect of Nano-Organosilane Zycotherm and Deviation of Aggregate Gradation on Aphallt Film Thickness and Moisture Sensitivity of Hot Mix Asphalt. Civil Infrastructure Researches.
 

61.  Asadi, P., Akbari, M., Kohantorabi, O., Peyghami, M., Aliha, M. R. M.*, Salehi, S. M., ... & Berto, F. (2022). Characterization of the Influence of Rotational and Traverse Speeds on the Mechanical and Microstructural Properties of Wires Produced By the FSBE Method. Strength of Materials, 1-13.
 

 2021

62. Aliha, M. R. M.*, Ziari, H., Sobhani Fard, E., & Jebalbarezi Sarbijan, M. (2021). Heterogeneity effect on fracture parameters of a multilayer asphalt pavement structure containing a topdown crack and subjected to moving traffic loading. Fatigue & Fracture of Engineering Materials & Structures.
 

63. He, J, Liu L, Yang H, Aliha, M. R. M.* & Karimi H. R. (2021). Contribution of Interface Fracture Mechanism on Fracture Propagation Trajectory of Heterogeneous Asphalt Composites, Applied Science
 

64. Ameri, B., Taheri-Behrooz, F., & Aliha, M. R. M. (2021). Evaluation of the Geometrical Discontinuity in the Mixed-Mode I/II Fracture Load of FDM 3D-Printed Parts. Theoretical and Applied Fracture Mechanics, 102953.
 

65. Fuan, S., Ke, M., Kanghe, L., Kun, L., & Aliha, M. R. M.* (2021). Influence of specimen geometry on mode I fracture toughness of asphalt concrete. Construction and Building Materials, 276, 122181.
 

66.Xiongzhou, Y., Yuze, T., Qinglin, L., Song, L., Qianwen, D., & Aliha, M. R. M.* (2021). KIc and KIIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses. Fatigue & Fracture of Engineering Materials & Structures, 44(3), 832-846.
 

67. Shahryari, N., Keymanesh, M. R., & Aliha, M. R. M. (2021). Specimen type effect on measured lowtemperature fracture toughness of asphalt concrete. Fatigue & Fracture of Engineering Materials & Structures, 44(2), 551-567.
 

68.  Asdollah-Tabar, M., Heidari-Rarani, M., & Aliha, M. R. M. (2021). The effect of recycled PET bottles on the fracture toughness of polymer concrete. Composites Communications, 100684.
 

69. Pietras, D., Aliha, M. R. M., & Sadowski, T. (2021). Mode III fracture toughness testing and numerical modeling for aerated autoclaved concrete using notch cylinder specimen subjected to torsion. Materials Today: Proceedings.
 

70. Aliha, M. R. M.*, Ebneabbasi, P., reza Karimi, H., & Nikbakht, E. (2021). A novel test device for the direct measurement of tensile strength of rock using ring shape sample. International Journal of Rock Mechanics and Mining Sciences, 139, 104649.
 

71.Bahmani, A., Farahmand, F., Janbaz, M. R., Darbandi, A. H., Ghesmati-Kucheki, H., & Aliha, M. R. M.* (2021). On the comparison of two mixed-mode I+ III fracture test specimens. Engineering Fracture Mechanics, 241, 107434.
 

 2020

72. Ameri, B., Taheri-Behrooz, F., & Aliha, M. R. M. (2020). Fracture loads prediction of the modified 3D-printed ABS specimens under mixed-mode I/II loading. Engineering Fracture Mechanics, 235, 107181.
 

73. Motamedi, H., Amiri, H. R., Fazaeli, H., & Mohammad Aliha, M. R. (2020). Providing a Prediction Model for Stress Intensity Factor of Fiber-Reinforced Asphalt Mixtures under Pure Mode III Loading Using the Edge Notched Disc Beam (ENDB). Civil Engineering Infrastructures Journal.
 

74.Aliha, M. R. M.*, & Shaker, S. (2020). Effect of bitumen type, temperature and aging on mixed I/II fracture toughness of asphalt binders-experimental and theoretical assessment. Theoretical and Applied Fracture Mechanics, 110, 102801.
 

75. Najjar, S., Moghaddam, A. M., Sahaf, A., & Aliha, M. R. M. (2020). Low temperature fracture resistance of cement emulsified asphalt mortar under mixed mode I/III loading. Theoretical and Applied Fracture Mechanics, 110, 102800.
 

76.Fakhri, M., Siyadati, S. A., & Aliha, M. R. M. (2020). Impact of freeze–thaw cycles on low temperature mixed mode I/II cracking properties of water saturated hot mix asphalt: an experimental study. Construction and Building Materials, 261, 119939.
 

77.Aliha, M. R. M.*, & Pour, P. J. H. (2020). Fracture resistance study for hot mix asphalt mixture under out of plane sliding mode. Engineering Fracture Mechanics, 238, 107230.
 

78.Jebalbarezi, M., Ziari, H., Aliha, M. R. M.*, Mojaradi, B., & Sobhanifard, E. (2020). Simulation of heterogeneous asphalt mixture using random aggregate generation and packing algorithm. Journal of Transportation Research.
 

79.Aliha, M. R. M.*, Ziari, H., Mojaradi, B., & Sarbijan, M. J. (2020). Modes I and II stress intensity factors of semi-circular bend specimen computed for two-phase aggregate/mastic asphalt mixtures. Theoretical and Applied Fracture Mechanics, 106, 102437.
 

80. Aliha, M. R. M.*, Ziari, H., Mojaradi, B., & Sarbijan, M. J. (2020). Heterogeneity effects on mixedmode I/II stress intensity factors and fracture path of laboratory asphalt mixtures in the shape of SCB specimen. Fatigue & Fracture of Engineering Materials & Structures, 43(3), 586-604.
 

81. Motamedi, H., Fazaeli, H., Aliha, M. R. M., & Amiri, H. R. (2020). Evaluation of temperature and loading rate effect on fracture toughness of fiber reinforced asphalt mixture using edge notched disc bend (ENDB) specimen. Construction and Building Materials, 234, 117365.
 

82.Ziari, H., Aliha, M. R. M.*, Moniri, A., & Saghafi, Y. (2020). Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber. Construction and Building Materials, 230, 117015.
 

83.Sharifi, E., Sadjadi, S. J., Aliha, M. R. M.*, & Moniri, A. (2020). Optimization of high-strength self-consolidating concrete mix design using an improved Taguchi optimization method. Construction and Building Materials, 236, 117547.
 

84. Bidadi, J., Akbardoost, J., & Aliha, M. R. M. (2020). Thickness effect on the mode III fracture resistance and fracture path of rock using ENDB specimens. Fatigue & Fracture of Engineering Materials & Structures, 43(2), 277-291.
 

85.Mahdavi, E., Aliha, M. R. M.*, Bahrami, B., & Ayatollahi, M. R. (2020). Comprehensive data for stress intensity factor and critical crack length in chevron notched semi-circular bend specimen subjected to tensile type fracture mode. Theoretical and Applied Fracture Mechanics, 106, 102466.
 

86. Aliha, M. R. M.*, Ghoreishi, S. M. N., Imani, D. M., Fotoohi, Y., & Berto, F. (2020). Mechanical and fracture properties of aluminium cylinders manufactured by orbital friction stir welding. Fatigue & Fracture of Engineering Materials & Structures, 43(7), 1514-1528.
 

87. Bahmani, A., Aliha, M. R. M.*, Sarbijan, M. J., & Mousavi, S. S. (2020). An extended edge-notched disc bend (ENDB) specimen for mixed-mode I+ II fracture assessments. International Journal of Solids and Structures, 193, 239-250.
 

88.Mousavi, A., Aliha, M. R. M., & Imani, D. M. (2020). Effects of biocompatible Nanofillers on mixed-mode I and II fracture toughness of PMMA base dentures. Journal of the mechanical behavior of biomedical materials, 103, 103566.
 

89. Aliha, M. R. M.*, & Mousavi, S. S. (2020). Sub-sized short bend beam configuration for the study of mixed-mode fracture. Engineering Fracture Mechanics, 225, 106830.
 

90. Mousavi, S. S., Aliha, M. R. M.*, & Imani, D. M. (2020). On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II. Polymer Testing, 81, 106199.
 

2019

91. Moniri, A., Ziari, H., Aliha, M. R. M., & Saghafi, Y. (2019). Laboratory study of the effect of oil-based recycling agents on high RAP asphalt mixtures. International Journal of Pavement Engineering, 1-12.
 

92. Amirdehi, H. F., Aliha, M. R. M.*, Moniri, A., & Torabi, A. R. (2019). Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results–A statistical analysis. Construction and Building Materials, 213, 483-491.
 

93. Ziari, H., Aliha, M. R. M., Mojaradi, B., & Jebalbarezi Sarbijan, M. (2019). Investigating the effects of loading, mechanical properties and layers geometry on fatigue life of asphalt pavements. Fatigue & Fracture of Engineering Materials & Structures, 42(7), 1563-1577.
 

94. Eghbali, M. R., Tafti, M. F., Aliha, M. R. M., & Motamedi, H. (2019). The effect of ENDB specimen geometry on mode I fracture toughness and fracture energy of HMA and SMA mixtures at low temperatures. Engineering Fracture Mechanics, 216, 106496.
 

95. Ziari, H., Mojaradi, B., Mohammad Aliha, M. R., & Jebalbarezi, M. (2019). Investigation the effect of geometrical and mechanical characterization of pavement layers on failure rate of HMA overlay. Quarterly Journal of Transportation Engineering.
 

96. Aliha, M. R. M.* (2019). On predicting mode II fracture toughness (KIIc) of hot mix asphalt mixtures using the strain energy density criterion. Theoretical and Applied Fracture Mechanics, 99, 36-43.
 

97. Aliha, M. R. M.*, Shaker, S., & Keymanesh, M. R. (2019). Low temperature fracture toughness study for bitumen under mixed mode I+ II loading condition. Engineering Fracture Mechanics, 206, 297-309.
 

98. Shaker, S., Aliha, M. R. M.*, & Keymanesh, M. R. (2019). Aging effect on combined mode fracture resistance of bitumen. Fatigue & Fracture of Engineering Materials & Structures, 42(7), 1609-1621.
 

99. Torabi, A. R., Kalantari, M. H., Aliha, M. R. M.*, & Ghoreishi, S. M. N. (2019). Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion. Theoretical and Applied Fracture Mechanics, 104, 102369.
 

100.Akbari, M., Aliha, M. R. M.*, Keshavarz, S. M. E., & Bonyadi, A. (2019). Effect of tool parameters on mechanical properties, temperature, and force generation during FSW. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(6), 1033-1043.
 

101. Aliha, M. R. M.*, Mousavi, S. S., & Ghoreishi, S. M. N. (2019). Fracture load prediction under mixed mode I+ II using a stress based method for brittle materials tested with the asymmetric four-point bend specimen. Theoretical and Applied Fracture Mechanics, 103, 102249.
 

102. Aliha, M. R. M.*, Ghazi, H., & Ataei, F. (2019). Experimental fracture resistance study for cracked bovine femur bone samples. Frattura ed Integrità Strutturale, 13(50), 602-612.
 

103. Aliha, M. R. M.*, Mousavi, S. S., Bahmani, A., Linul, E., & Marsavina, L. (2019). Crack initiation angles and propagation paths in polyurethane foams under mixed modes I/II and I/III loading. Theoretical and Applied Fracture Mechanics, 101, 152-161.
 

104. Momeni, M. A., Yaghoubi, S., & Aliha, M. R. M. (2019). An optimal control model for analyzing quality investment in the project management. Computers & Industrial Engineering, 129, 529-544.
 

105. Bahmani, A., Farahmand, F., Ataei, F., & Aliha, M. R. M.* (2019). Mixed mode I/III fracture parameters for edgenotched diametrically compressed disc specimen. Material Design & Processing Communications, 1(6), e86.
 

 2018

106. Mansourian, A., Hashemi, S., &  Mohammad Aliha, M. R. (2018). Evaluation of pure and mixed modes (I/III) fracture toughness of Portland cement concrete mixtures containing reclaimed asphalt pavement. Construction and Building Materials, 178, 10-18.
 

107. Jafari Haghighatpour, P., & Aliha, M. R. M.* (2018). Investigation of Asphalt Mixture Characteristics against Pure Mode III Fracture. Journal of Transportation Infrastructure Engineering, 4(1), 71-85.
 

108. Fakhri, M., Kharrazi, E. H., & Aliha, M. R. M.* (2018). Mixed mode tensile–In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions. Engineering Fracture Mechanics, 192, 98-113.
 

109. Pour, P. H., Aliha, M. R. M.*, & Keymanesh, M. R. (2018). Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions. Engineering Fracture Mechanics, 190, 245-258.
 

110. Aliha, M. R. M.*, Fakhri, M., Kharrazi, E. H., & Berto, F. (2018). The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes. Frattura ed Integrità Strutturale, 12(43), 113-132.
 

111. Aliha, M. R. M.*, Razmi, A., & Mousavi, A. (2018). Fracture study of concrete composites with synthetic fibers additive under modes I and III using ENDB specimen. Construction and Building Materials, 190, 612-622.
 

112. Rooholamini, H., Hassani, A., & Aliha, M. R. M. (2018). Fracture properties of hybrid fibre-reinforced roller-compacted concrete in mode I with consideration of possible kinked crack. Construction and Building Materials, 187, 248-256.
 

113. Rooholamini, H., Hassani, A., & Aliha, M. R. M. (2018). Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology. Construction and Building Materials, 159, 517-529.
 

114. Razavi, S. M. J., Aliha, M. R. M.*, & Berto, F. (2018). Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens. Theoretical and Applied Fracture Mechanics, 97, 419-425.
 

115. Aliha, M. R. M.*, Mahdavi, E., & Ayatollahi, M. R. (2018). Statistical analysis of rock fracture toughness data obtained from different chevron notched and straight cracked mode I specimens. Rock Mechanics and Rock Engineering, 51(7), 2095-2114.
 

116. Mirsayar, M. M., Razmi, A., Aliha, M. R. M., & Berto, F. (2018). EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials. Engineering Fracture Mechanics, 190, 186-197.
 

117. Aliha, M. R. M.*, Fotouhi, Y., & Berto, F. (2018). Experimental notched fracture resistance study for the interface of Al–Cu bimetal joints welded by friction stir welding. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(12), 2192-2200.
 

118. Torabi, A. R., Kalantari, M. H., & Aliha, M. R. M. (2018). Fracture analysis of dissimilar AlAl friction stir welded joints under tensile/shear loading. Fatigue & Fracture of Engineering Materials & Structures, 41(9), 2040-2053.
 

119. Taheri-Behrooz, F., Aliha, M. R., Maroofi, M., & Hadizadeh, V. (2018). Residual stresses measurement in the butt joint welded metals using FSW and TIG methods. Steel and Composite Structures, 28(6), 759-766.
 

120. Mirmohammad, S. H., Safarabadi, M., Karimpour, M., Aliha, M. R. M.*, & Berto, F. (2018). Study of composite fiber reinforcement of cracked thin-walled pressure vessels utilizing multi-scaling technique based on extended finite element method. Strength of Materials, 50(6), 925-936.
 

121. Arab Momeni, M., Yaghoubi, S., & Aliha, M. R. (2018). Optimal control of quality investment in joint venture by Stackelberg game. Journal of Industrial and Systems Engineering, 11(Special issue on game theory applications' in industrial engineering), 83-107.
 

122. Aliha, M. R. M., Linul, E., Bahmani, A., & Marsavina, L. (2018). Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+ III loading. Polymer Testing, 67, 75-83.
 

123. Aliha, M. R. M.*, Bagherifard, S., Akhondi, S., Mousavi, S. S., Mousavi, A., & Parsania, H. (2018). Fracture and microstructural study of bovine bone under mixed mode I/II loading. Procedia Structural Integrity, 13, 1488-1493.
 

 2017

124. Aliha, M. R. M.*, Razmi, A., & Mansourian, A. (2017). The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials. Engineering Fracture Mechanics, 182, 322-336.
 

125. Fakhri, M., Amoosoltani, E., & Aliha, M. R. M. (2017). Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber. Engineering Fracture Mechanics, 180, 43-59.
 

126. Aliha, M. R. M.*, & Fattahi Amirdehi, H. R. (2017). Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents. Fatigue & Fracture of Engineering Materials & Structures, 40(1), 55-68.
 

127. Aliha, M. R. M.*, Sarbijan, M. J., & Bahmani, A. (2017). Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations. Construction and Building Materials, 155, 789-799.
 

128. Daneshfar, M., Hassani, A., Aliha, M. R. M., & Berto, F. (2017). Evaluating mechanical properties of macro-synthetic fiber-reinforced concrete with various types and contents. Strength of Materials, 49(5), 618-626.
 

129. Aliha, M. R. M.*, Berto, F., Mousavi, A., & Razavi, S. M. J. (2017). On the applicability of ASED criterion for predicting mixed mode I+ II fracture toughness results of a rock material. Theoretical and Applied Fracture Mechanics, 92, 198-204.
 

130. Aliha, M. R. M.*, & Bahmani, A. (2017). Rock fracture toughness study under mixed mode I/III loading. Rock Mechanics and Rock Engineering, 50(7), 1739-1751.
 

131. Aliha, M. R. M.*, Mahdavi, E., & Ayatollahi, M. R. (2017). The influence of specimen type on tensile fracture toughness of rock materials. Pure and Applied Geophysics, 174(3), 1237-1253.
 

132. Aliha, M. R. M.*, & Gharehbaghi, H. (2017). The effect of combined mechanical load/welding residual stress on mixed mode fracture parameters of a thin aluminum cracked cylinder. Engineering Fracture Mechanics, 180, 213-228.
 

133. Bahmani, A., Aliha, M. R. M.*, & Berto, F. (2017). Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation. Theoretical and Applied Fracture Mechanics, 90, 53-64.
 

134. Aliha, M. R. M.*, Berto, F., Bahmani, A., & Gallo, P. (2017). Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion. Physical Mesomechanics, 20(2), 149-156.
 

135. Dehghany, M., Saeidi Googarchin, H., & Aliha, M. R. M. (2017). The role of first nonsingular stress terms in mixed mode brittle fracture of Vnotched components: an experimental study. Fatigue & Fracture of Engineering Materials & Structures, 40(4), 623-641.
 

2016

136. Aliha, M. R. M.*, Bahmani, A., & Akhondi, S. (2016). A novel test specimen for investigating the mixed mode I+ III fracture toughness of hot mix asphalt composites–Experimental and theoretical study. International Journal of Solids and Structures, 90, 167-177.
 

137. Ameri, M., Nowbakht, S., Molayem, M., & Aliha, M. R. M. (2016). Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes. Fatigue & fracture of engineering materials & structures, 39(7), 896-906.
 

138. Aliha, M. R. M.*, & Sarbijan, M. J. (2016). Effects of loading, geometry and material properties on fracture parameters of a pavement containing top-down and bottom-up cracks. Engineering Fracture Mechanics, 166, 182-197.
 

139. Aliha, M. R. M.*, Shahheidari, M., Bisadi, M., Akbari, M., & Hossain, S. (2016). Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique. The International Journal of Advanced Manufacturing Technology, 86(9), 2551-2565.
 

140. Aliha, M. R. M.*, Berto, F., Bahmani, A., Akhondi, S., & Barnoush, A. (2016). Fracture assessment of polymethyl methacrylate using sharp notched disc bend specimens under mixed mode I+ III loading. Physical Mesomechanics, 19(4), 355-364.
 

141. Aliha, M. R. M.*, Bahmani, A., & Akhondi, S. (2016). Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens. European Journal of Mechanics-A/Solids, 58, 148-162.
 

142 .Mirsayar, M. M., Berto, F., Aliha, M. R. M., & Park, P. (2016). Strain-based criteria for mixed-mode fracture of polycrystalline graphite. Engineering Fracture Mechanics, 156, 114-123.
 

143. Mousavi, A., & Aliha, M. R. M.* (2016). Determination of fracture parameters for a bi-material center cracked plate subjected to biaxial loading using FEOD method. Engineering Solid Mechanics, 4(3), 117-124.
 

 2015

144. Aliha, M. R. M.*, Fazaeli, H., Aghajani, S., & Nejad, F. M. (2015). Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. Construction and Building Materials, 95, 545-555.
 

145. Aliha, M. R. M.*, Behbahani, H., Fazaeli, H., & Rezaifar, M. H. (2015). Experimental study on modeI fracture toughness of different asphalt mixtures. Scientia Iranica, 22(1), 120-130.
 

146. Aliha, M. R. M.*, & Gharehbaghi, H. (2015). Fracture parameter determination for a thin walled pressurized cylinder under the influence of residual stress induced by welding process. Aerospace Knowledge and Technology Journal, 3(2), 77-87.
 

147. Aliha, M. R. M.*, Bahmani, A., & Akhondi, S. (2015). Determination of mode III fracture toughness for different materials using a new designed test configuration. Materials & Design, 86, 863-871.
 

148. Aliha, M. R. M.*, Bahmani, A., & Akhondi, S. (2015). Fracture and fatigue analysis for a cracked carabiner using 3D finite element simulations. Strength of Materials, 47(6), 890-902.
 

149. Samaei, A. T., Aliha, M. R. M., & Mirsayar, M. M. (2015). FREQUENCY ANALYSIS OF A GRAPHENE SHEET EMBEDDED IN AN ELASTIC MEDIUM WITH CONSIDERATION OF SMALL SCALE. Materials Physics & Mechanics, 22(2).
 

150. Aliha, M. R. M.*,  Mousavi, A., Mehri Khansari, N., & Safarabadi, M. (2015). Effects of alumina and hydroxyapatite nanoparticles on fracture toughness of PMMA based dental composite. Journal of Science and Technology of Composites, 2(2), 9-16.
 

151. Samaei, A., Mirsayar, M., & Aliha, M. (2015). The microstructure and mechanical behavior of modern high temperature alloys. Engineering Solid Mechanics, 3(1), 1-20.
 

152. Aliha, M. R. M.*, Bahmani, A., & Akhondi, S. (2015). Numerical analysis of a new mixed mode I/III fracture test specimen. Engineering Fracture Mechanics, 134, 95-110.
 

 2014

153. Aliha, M. R. M.*, Behbahani, H., Fazaeli, H., & Rezaifar, M. H. (2014). Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Construction and Building Materials, 54, 623-635.
 

154. Heidari-Rarani, M., Aliha, M. R. M., Shokrieh, M. M., & Ayatollahi, M. R. (2014). Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings–An experimental study. Construction and Building Materials, 64, 308-315.
 

155 .Aliha, M. R. M.* (2014). Indirect tensile test assessments for rock materials using 3-D disc-type specimens. Arabian Journal of Geosciences, 7(11), 4757-4766.
 

156. Akbardoost, J., Ayatollahi, M. R., Aliha, M. R. M.*, Pavier, M. J., & Smith, D. J. (2014). Size-dependent fracture behavior of Guiting limestone under mixed mode loading. International Journal of Rock Mechanics and Mining Sciences, 71, 369-380.
 

157. Aliha, M. R. M., & Ayatollahi, M. R. (2014). Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading–A statistical approach. Theoretical and Applied Fracture Mechanics, 69, 17-25.
 

158. Mirsayar, M. M., Aliha, M. R. M., & Samaei, A. T. (2014). On fracture initiation angle near bi-material notches–Effects of first non-singular stress term. Engineering fracture mechanics, 119, 124-131.
 

159. Bohlouri, V., Kosari, A., & Aliha, M. R. M.* (2014). Systematic design of an atmospheric data acquisition flying vehicle telemetry system. Engineering Solid Mechanics, 2(4), 265-276.
 

160. Aliha, M. R. M., Pakzad, R., & Ayatollahi, M. R. (2014). Numerical analyses of a cracked straight-through flattened Brazilian disk specimen under mixed-mode loading. Journal of Engineering Mechanics, 140(1), 219-224.
 

 2013

161. Behbahani, H., Mohammad Aliha, M. R., Fazaeli, H., & Aghajani, S. (2013). Experimental fracture toughness study for some modified asphalt mixtures. In Advanced Materials Research (Vol. 723, pp. 337-344). Trans Tech Publications Ltd.
 

162. Aliha, M. R. M.*, Hosseinpour, G. R., & Ayatollahi, M. R. (2013). Application of cracked triangular specimen subjected to three-point bending for investigating fracture behavior of rock materials. Rock mechanics and rock engineering, 46(5), 1023-1034.
 

163. Aliha, M. R. M., & Ayatollahi, M. R. (2013). Two-parameter fracture analysis of SCB rock specimen under mixed mode loading. Engineering Fracture Mechanics, 103, 115-123.
 

164. Mirlohi, S., & Aliha, M. (2013). Crack growth path prediction for the angled cracked plate using higher order terms of Williams series expansion. Engineering Solid Mechanics, 1(3), 77-84.
 

165. Torabi, A., & Aliha, M. (2013). Determination of permissible defect size for solid axles loaded under fully-reversed rotating bending. Engineering Solid Mechanics, 1(1), 27-36.
 

166. Aliha, M. R. M.*, & Saghafi, H. (2013). The effects of thickness and Poisson’s ratio on 3D mixed-mode fracture. Engineering Fracture Mechanics, 98, 15-28.
 

 2012

167. Ameri, M., Mansourian, A., Pirmohammad, S., Aliha, M. R. M., & Ayatollahi, M. R. (2012). Mixed mode fracture resistance of asphalt concrete mixtures. Engineering Fracture Mechanics, 93, 153-167.
 

168. Aliha, M. R. M.*, Heidari-Rarani, M., Shokrieh, M. M., & Ayatollahi, M. R. (2012). Experimental determination of tensile strength and K (IC) of polymer concretes using semi-circular bend(SCB) specimens. Structural Engineering and Mechanics, 43(6), 823-833.
 

169. Aliha, M. R. M.*, HEIDARI, R. M., Shokrieh, M. M., & Ayatollahi, M. R. (2012). Determination of tensile strength and crack growth of a typical polymer concrete using circular disc samples.
 

170. Aliha, M. R. M., Sistaninia, M., Smith, D. J., Pavier, M. J., & Ayatollahi, M. R. (2012). Geometry effects and statistical analysis of mode I fracture in guiting limestone. International Journal of Rock Mechanics and Mining Sciences, 51, 128-135.
 

171. Aliha, M. R. M.*, Ayatollahi, M. R., & Akbardoost, J. (2012). Typical upper bound–lower bound mixed mode fracture resistance envelopes for rock material. Rock mechanics and rock engineering, 45(1), 65-74.
 

172. Aliha, M. R. M., & Ayatollahi, M. R. (2012). Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion. International Journal of Solids and Structures, 49(13), 1877-1883.
 

 2011

173. Ameri, M., Mansourian, A., Khavas, M. H., Aliha, M., & Ayatollahi, M. R. (2011). Cracked asphalt pavement under traffic loading–A 3D finite element analysis. Engineering Fracture Mechanics, 78(8), 1817-1826.
 

174. Aliha, M. R. M., & Ayatollahi, M. R. (2011). Mixed mode I/II brittle fracture evaluation of marble using SCB specimen. Procedia Engineering, 10, 311-318.
 

175. Ayatollahi, M. R., & Aliha, M. R. M. (2011). On the use of an antisymmetric fourpoint bend specimen for mode II fracture experiments. Fatigue & Fracture of Engineering Materials & Structures, 34(11), 898-907.
 

176. Ayatollahi, M. R., & Aliha, M. R. M. (2011). Fracture analysis of some ceramics under mixed mode loading. Journal of the American Ceramic Society, 94(2), 561-569.
 

177. Aliha, M. R. M.*, & Rezaei, M. (2011). Experimental and theoretical study of fracture paths in brittle cracked materials subjected to pure mode II loading. In Applied Mechanics and Materials (Vol. 70, pp. 159-164). Trans Tech Publications Ltd.
 

178. Ayatollahi, M. R., Aliha, M. R. M., & Saghafi, H. (2011). An improved semi-circular bend specimen for investigating mixed mode brittle fracture. Engineering Fracture Mechanics, 78(1), 110-123.
 

 2010

179. Aliha, M. R. M., Ayatollahi, M. R., Smith, D. J., & Pavier, M. J. (2010). Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading. Engineering Fracture Mechanics, 77(11), 2200-2212.
 

180.Aliha, M. R. M., & Ayatollahi, M. R. (2010). Geometry effects on fracture behaviour of polymethyl methacrylate. Materials Science and Engineering: A, 527(3), 526-530.
 

2009

181. Aliha, M. R. M., & Ayatollahi, M. R. (2009). Brittle fracture evaluation of a fine grain cement mortar in combined tensileshear deformation. Fatigue & Fracture of Engineering Materials & Structures, 32(12), 987-994.
 

182. Ayatollahi, M. R., Saghafi, H., & Mohammad Aliha, M. R. (2009). Effect of specimen dimensions on fracture toughness of Harsin marble rock. Scientific Quarterly Journal of Iranian Association of Engineering Geology, 2(1 & 2), 73-82.
 

183. Aliha, M. R. M.*, Ayatollahi, M. R., & Kharazi, B. (2009). Mode II brittle fracture assessment using ASFPB specimen. International journal of fracture, 159(2), 241.
 

184. Aliha, M. R. M., Ayatollahi, M. R., & Kharazi, B. (2009). Numerical and experimental investigations of mixed mode fracture in granite using four-point-bend specimen. In Damage and fracture mechanics (pp. 275-283). Springer, Dordrecht.
 

185. Aliha, M. R. M.*, Ayatollahi, M. R., & Kharazi, B. (2009). Mode II brittle fracture assessment using ASFPB specimen. International journal of fracture, 159(2), 241.
 

186. Ayatollahi, M. R., & Aliha, M. R. M. (2009). Analysis of a new specimen for mixed mode fracture tests on brittle materials. Engineering Fracture Mechanics, 76(11), 1563-1573.
 

187. Ayatollahi, M. R., & Aliha, M. R. M. (2009). Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion. International Journal of Solids and Structures, 46(2), 311-321.
 

188. Scholey, J. J., Wilcox, P. D., Wisnom, M. R., Friswell, M. I., Pavier, M., & Aliha, M. R. (2009). A GENERIC TECHNIQUE FOR ACOUSTIC EMISSION SOURCE LOCATION. Journal of acoustic emission, 27.
 

 2008

189. Ayatollahi, M. R., & Aliha, M. R. M. (2008). On the use of Brazilian disc specimen for calculating mixed mode I–II fracture toughness of rock materials. Engineering Fracture Mechanics, 75(16), 4631-4641.
 

190. Aliha, M. R. M., Ayatollahi, M. R., & Pakzad, R. (2008). Brittle fracture analysis using a ring-shape specimen containing two angled cracks. International Journal of Fracture, 153(1), 63-68.
 

191. Ayatollahi, M. R., & Aliha, M. R. M. (2008). Mixed mode fracture analysis of polycrystalline graphite–a modified MTS criterion. Carbon, 46(10), 1302-1308.
 

192. Aliha, M. R. M., & Ayatollahi, M. R. (2008). On mixed-mode I/II crack growth in dental resin materials. Scripta Materialia, 59(2), 258-261.
 

2007

193. Ayatollahi, M. R., & Aliha, M. R. M. (2007). Fracture toughness study for a brittle rock subjected to mixed mode I/II loading. International Journal of Rock Mechanics and Mining Sciences, 44(4), 617-624.
 

194. Ayatollahi, M. R., & Aliha, M. R. M. (2007). Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading. Computational materials science, 38(4), 660-670.
 

195. Ayatollahi, M. R., Aliha, M. R. M., & Rahmanian, S. (2007). Finite Element Analysis of an Improved Center Crack Specimen. In Key Engineering Materials (Vol. 347, pp. 441-446). Trans Tech Publications Ltd.
 

2006

196. Ayatollahi, M. R., & Aliha, M. R. M. (2006). On determination of mode II fracture toughness using semi-circular bend specimen. International Journal of Solids and Structures, 43(17), 5217-5227.
 

197. Ayatollahi, M. R., Aliha, M. R. M., & Hassani, M. M. (2006). Mixed mode brittle fracture in PMMA—an experimental study using SCB specimens. Materials Science and Engineering: A, 417(1-2), 348-356.
 

198. Aliha, M. R. M., Ashtari, R., & Ayatollahi, M. R. (2006). Mode I and mode II fracture toughness testing for a coarse grain marble. In Applied mechanics and materials (Vol. 5, pp. 181-188). Trans Tech Publications Ltd.
 

 2005

199. Ayatollahi, M. R., & Aliha, M. R. M. (2005). Cracked Brazilian disc specimen subjected to mode II deformation. Engineering fracture mechanics, 72(4), 493-503.
 

 2004

200. Ayatollahi, M. R., & Aliha, M. R. M. (2004). Fracture parameters for a cracked semi-circular specimen. International Journal of Rock Mechanics and Mining Sciences, 41, 20-25.
 

201. Ayatollahi, M. R., & Aliha, M. R. M. (2004). Fracture parameters for a cracked semi-circular specimen. International Journal of Rock Mechanics and Mining Sciences, 41, 20-25. 
 

2002

202. Ayatollahi, M. R., Mohammad-Aliha, M. R., & Aliniaziazi, A. (2002). Variations of the non-singular stress term around the crack tip. International Journal of Engineering Science (Tehran), 13(3), 173-186. 

مقالات منتشر شده در کنفرانس های بین المللی داخلی و خارجی

1.Aliha, M.R.M.*, Kucheki, H. G., & Razavi, S. M. J. (2022). In-plane fracture analysis of bi-material adhesively bonded joints by using a simple bend beam specimen. 2nd Mediterranean Conference on Fracture and Structural Integrit, Italy.
 

2.Aliha, M.R.M.*, Kucheki, H. G., & Berto, F. (2022). Numerical analysis of crack initiation angles and propagation paths in adhesively bonded joints under mixed mode I/II loading using a novel test specimen. 7th International Conference on Crack Paths, Italy.
 

3.Aliha, M.R.M.*, Bagherifard, S. Akhondi, Sh, Mousavi, Ss, Mousavi A & Parsania H. (2018). Fracture and micro Structure study of Bovine bone under mixed mode I/II using a new test specimen. 22nd, European Conference on Fracture-ECF22, Serbia, Belgrad.
 

4.Aliha, M.R.M. *, Aram BAHMANI, Emanoil, LINUL, Liviu MARSAVINA, Sina Samareh MOUSAVI & Atefeh MOUSAVI (2018). Investigation of fracture initiation angle and propagation path for PUR foams under mixed mode I/III loading The 6th International Conference on Crack Paths (CP 2018), Verona, Italy.
 

5.Aliha, M.R.M*., Filippo BERTO, Sina Samareh MOUSAVI & Atefeh MOUSAVI. (2018). Fracture path prediction in two biomaterials tested under mixed mode loading. The 6th International Conference on Crack Paths (CP 2018), Verona, Italy.
 

6. Heydari-Rarani M., Aliha, M.R.M*, Shokrieh, M.M. Ayatollahi M.R. (2014) “Effect of thermal cycle on the fracture toughness of epoxy polymer concrete” X-Mech-2014, Tehran, Iran.
 

7.Molayem M., Aliha M.R.M. *, Ameri M., Nowbakht Sh., Ajideh H., Earthman J.C. (2014) “An irreversible cohesive crack model for estimating the fatigue life of asphalt mixtures” X-Mech-2014, Tehran, Iran.
 

8.Aliha, M.R.M. *, Gharehbaghi H., Ghafoori Ahangar R. (2013) “Fracture study of a welded aluminum cylinder containing longitudinal crack and subjected to combined residual stress and internal pressure” 12th International Aluminum Conference- Montreal, Canada.
 

9.Aliha, M.R.M*., Ghoreishi, S.M.N., Kosari. A.R. (2014) “On the relation between the moments of Inertia and the mass body center of a typical geo satellite and the full consumption” 13th  International Aerospace conference, Tehran, Iran.
 

10. Behbahani, H. Aliha M.R.M*., Fazaeli, H., Asayesh, M.R. (2013) Effect of Characteristic Specifications on Fracture Toughness of Asphalt Concrete Materials. 13th International Conference on Fracture, Beiging, China.
 

11.Aliha, M.R.M*, Heydari-Rarani, M., Shokrieh, M.M. Ayatollahi M.R (2012) Mode I Fracture Toughness evaluation for a Glass-Fibre Reinforced Polymer Concrete using BD and SCB specimens” International Conference on Frontiers of Mechanical Engineering, Materials and Energy (ICFMEME 2012). Beijing, China.
 

12. Aliha, M.R.M*., Ayatollahi, M.R., Noori, H. (2012) “Longitudinal residual stress computation for lap jointed welds using finite element method” National Conference on Mechanical Engineering (NCME 2012), Iran.
 

13. Behbahani, H. Aliha M.R.M*., Fazaeli, H., Asayesh, M.R. (2012) “Low temperature fracture behavior investigation for recycled asphalt pavements” 12th Annual International Conference on: Sustainable Construction Materials, Pavement Engineering and Infrastructure, Liverpool, UK.
 

14.Behbahani, H. Aliha M.R.M. *, Fazaeli, H., Aghajani, S. (2013) “Experimental fracture toughness study for some modified asphalt mixtures” 8th International Conference on Road and Airfield Pavement Technology, Taiwan.
 

15.Behbahani, H. Aliha M.R.M. *, Fazaeli, H., Rezaei far, M.R., (2013) “Effect of characteristic specifications on mode I and mode II fracture toughness of asphalt concrete materials” 13th international conference on fracture, Beijing, China.
 

16. Aliha, M.R.M. *, Moradi, P. (2012) “Fracture analysis of DCDC and SCDC specimens subjected to mixed mode loading” The World Congress on Engineering 2012 (WCE 2012), London, UK.
 

17. Aliha, M.R.M. *, Mousavi, M., Ayatollahi, M.R. (2012) “Mixed mode I/II fracture path simulation in a typical jointed rock slope” The 4th International Conference on "Crack Paths" (CP 2012), Gaeta, Italy.
 

18.Ayatollahi, M.R. Aliha, M.R.M*., Gharebaghi, H. (2012). “Finite Element Method Simulation of Pipe Welding and Residual Stresses measurements” 4th Iran Pipe Tech conference, Tehran, Iran.
 

19.Aliha, M.R.M*, Heydari-Rarani, M., Shokrieh, M.M. Ayatollahi M.R. (2012)  Determination of fracture toughness and indirect tensile strength for a polymer concrete (PC) material using an experimental method , X-Mech-2012, Tehran, Iran.
 

20.Aliha, M.R.M*., Ameri, M., Mansourian, A., Ayatollahi, M.R. (2012) “Finite element analysis of a new test specimen for investigating mixed mode cracks in asphalt overlayes” 7th International Conference on Cracking in Pavements, Netherland.
 

21.Aliha, M.R.M. *, Ayatollahi, M.R. 2nd Conference on Thermal Power Plants (Gas, Combined Cycles, Steam), Tehran, Iran.
 

22.Ayatollahi, M.R. Aliha, M.R.M. *, Gharebaghi, H. (2011) “ three dimensional fracture analyses of a cylindrical shell containing semi elliptical crack” 1th conference on Iranian Aircraft Structural Integrity Program, Tehran, Iran.
 

23.Ayatollahi, M.R. Aliha, M.R.M. *, Gharebaghi, H. (2011)” residual stress study of welded structures and finite element analyses of welding process in 6060-T6 aluminum alloy”1st Regional Mechanical engineering congress, RCME 2011, Tehran, Iran.
 

24.Aliha, M.R.M., Ayatollahi, M.R., Hosseinpour, GH., (2011), 4th Iranian rock mechanics conference, Tehran,Iran.
 

25.Aliha, M.R.M*., Ayatollahi, M.R., Hosseinpour, GH., (2011), “Stability analysis and fracture path simulation of jointed rock slopes subjected to combined opening-sliding deformations” Slope stability conference2011, Vancouver-Canada
 

26. Aliha, M.R.M. *, Ayatollahi, M.R., Heidary Khavas M. (2011), “on the influence of thickness and mechanical properties of asphalt layers on the stress intensity factors of a transverse cracked asphalt pavement” 5st Iranian asphalt conference, Tehran, Iran.
 

27.Aliha, M.R.M*., Ayatollahi, M.R., Karimzadeh A. (2011), “Tensile strength determination of asphalt materials using semi-circular bend specimen” 5st Iranian asphalt conference, Tehran, Iran.
 

28. Aliha, M.R.M., Ayatollahi, M.R., (2011), “Mixed mode I/II brittle fracture evaluation of marble using SCB specimen “International congress on the mechanical behavior of materials (ICM11), Italy, Como.
 

29. Aliha, M.R.M*., Rezaei, M. (2011), “Experimental and theoretical study of fracture paths in brittle cracked materials subjected to pure mode II loading” International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV). 7th BSSM Conf. Edinburg, UK.
 

30. Aliha, M.R.M. *, Ayatollahi, M.R., Smith, D.J., Pavier, M.J. , (2011) “Geometry and loading effects on pure mode II fracture toughness of rock materials” 45nd US Rock Mechanics Symposium ARMA 2011, San Francisco, USA.
 

31. Aliha, M.R.M. *, Khoshdel, A, (2011) “Recent development in construction of welded gas and oil pipelines” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran.
 

32. Aliha, M.R.M*., Ayatollahi, M.R., (2011) “Integrity assessment of cracked longitudinal seam welded pipes subjected to combined torsion-internal pressure loads” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran.
 

33. Aliha, M.R.M., Ayatollahi, M.R., (2011) “Finite element analysis of stresses and deformations induced in buried pipelines” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran.
 

34.Ayatollahi, M.R. Aliha, M.R.M., Gharebaghi, H. (2011)” Methods of Residual Stress Measurement in Welded Pipelines and FEM Simulation of Pipe Welding” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran
 

35. Ayatollahi, M.R. Hosseinpour, GH.,Aliha, M.R.M. (2010), “Using a new tensile-shear cracked specimen for investigating fracture behavior of rock materials” International conference on experimental mechanics ICEM 2010, koualalampour. Malaysia.
 

36. Ayatollahi, M.R. Aliha, M.R.M., Hosseinpour, GH., (2010), “fracture study of a test specimen for evaluating the fracture toughness of rocks”1st national conference on structure-earthquake and geo technique Babolsar, Iran.
 

37. Aliha, M.R.M., Ayatollahi, M.R., Moradi P. (2010), “Numerical analysis of mode I and mode II stress intensity factors for a new cracked specimen”3rd national conference of mechanical engineering, Isfahan, Iran.
 

38. Aliha, M.R.M., Ayatollahi, M.R., Pourkavian M.H. (2010),Numerical analysis of hydraulic fracturing process in the wall of wellbore using the fracture mechanics approach” The 6th National Seminar on Watershed Management, Tehran, Iran.
 

39. Aliha, M.R.M., Ayatollahi, M.R., Hosseinpour, GH. (2010), “A fracture criterion for investigating the behavior of faults during the earthquake using fracture mechanics approach First Conference on Seismology and Earthquake Geodynamics. Kerman, Iran.
 

40. Aliha, M.R.M., Ayatollahi, M.R., Hosseinpour, GH. (2010), “Numerical and experimental analysis of a new tensile – shear cracked specimen used for fracture toughness study in rocks” Tehran International Mining Congress (IMC 2010), Tehran, Iran.
 

41. Aliha, M.R.M.*, Ayatollahi, M.R., Darban, H. (2010), “Experimental investigation of crack geometry on fracture toughness of rocks using short rod specimen” First Conference on Seismology and Earthquake Geodynamics. Kerman, Iran
 

42. Ameri, M., Mansourian, A., Aliha M.R.M., Heidary Khavas M. and Ayatollahi  M.R.  (2010), “Mixed mode deformation in a cracked asphalt pavement subjected to traffic loading” The 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), Parma, Italy.
 

43. Aliha, M.R.M., Ayatollahi, M.R. (2010), “Mechanical failure analysis of a broken turbine-compressor shaft in Rey steam powerplant”2nd Conference on Thermal Power Plants (Gas, Combined Cycles, Steam), Tehran, Iran.
 

44. Aliha, M.R.M., Ayatollahi, M.R., (2010), “Mixed mode I/II brittle fracture evaluation of marble using SCB specimen” The 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), Parma, Italy.
 

45. Ayatollahi, M.R., Aliha, M.R.M. *, Heidary Khavas M., (2010) “ Crack growth behavior assessment of  rock materials using cracked cylindrical  specimen subjected to three-point bend loading ” 14th Geophysics Conference of Iran, Tehran 2010.
 

46. Ayatollahi, M.R., Aliha, M.R.M., Pourkavian M.H. (2010) “in situ stress investigation for prediction of earthquake using hydraulic fracturing process” 14th Geophysics Conference of Iran, Tehran 2010.
 

47. Aliha, M.R.M. *, Ayatollahi, M.R., Hosseinpour, GH., (2010) “Numerical analyses of a new specimen for obtaining fracture toughness of rocks” 14th Geophysics Conference of Iran, Tehran 2010.
 

48. Aliha, M.R.M. *., Ayatollahi, M.R., Pourkavian M.H. (2010), “Numerical analysis of hydraulic fracturing process in wellbores; A three dimensional mixed mode study” The 1st International Applied Geological Congress, IAGC 2010, Mashhad, Iran.
 

49. Ayatollahi, M.R, Aliha, M.R.M., Rezaei, M. (2010), “On crack growth path of rock materials subjected to tensile loading” The 1st International Applied Geological Congress, IAGC 2010, Mashhad, Iran.
 

50. Aliha, M.R.M. *, Ayatollahi, M.R., Smith, D.J.,  Pavier, M.J. (2009), “Mixed mode crack path investigation in a limestone rock using two circular shape samples –An experimental and theoretical study”, International conference on crack path (CP 2009), Vicenza,  Italy.
 

51. Aliha, M.R.M. *, Ayatollahi, M.R., Smith, D.J., Pavier, M.J. (2009), “Statistical fracture toughness analysis of Guiting limestone using disc shape test specimens” 12th International Conference on Fracture ICF 2009, Ottawa, Canada.
 

52. Aliha, M.R.M. *, Ayatollahi, M.R, (2009), “Crack growth resistance of alumina and zirconia ceramics under mixed mode I-II deformation” 12th International Conference on Fracture ICF 2009, Ottawa, Canada.
 

53. Ayatollahi, M.R, Aliha, M.R.M., Kharrazi, B. (2009), “Crack growth behaviour of a brittle polymer under combined tensile-shear deformation” 14th International Conference on Deformation, Yield and Fracture of Polymers, Netherland.
 

54. Aliha, M.R.M., Ayatollahi, M.R. (2009), “Fracture resistance evaluation of mortar” 8th international congress on civil engineering, Shiraz, Iran.
 

55. Ayatollahi, M.R, Aliha, M.R.M., Kharrazi, B. (2009), “On validation of anti symmetric four-point bend specimen for determining mode II fracture toughness of rocks” 12th International Conference on Fracture, ICF 2009, Ottawa, Canada.
 

56. Ayatollahi, M.R. Aliha, M.R.M., Pourkavian, M.H. (2009), “Numerical analysis of hydraulic fracturing process in wellbores-A three dimensional mixed mode study”, 6th Iranian Geology conference Ireg 2009, Tehran, Iran.
 

57. Ayatollahi, M.R, Aliha, M.R.M. *,.Rezaei, M. (2009),  “On the stability of fracture path of PMMA subjected to mode I loading” 9th International Seminar on Polymer Science and Technology, Tehran, Iran.
 

58. Aliha, M.R.M., Ayatollahi, M.R., (2009), “Strength evaluation of cracked fine grained cement materials”, The 8th international congress on civil engineering, Shiraz, Iran
 

59. Ayatollahi, M.R., Aliha, M.R.M. (2008), “Fracture toughness assessment for some brittle silicon based ceramics”, The 7th International Conference on Experimental Mechanics 2008 (ICEM 2008), NANJING, China.
 

60.  Ayatollahi, M.R., Aliha, M.R.M. (2008), “Investigation of combined opening-sliding fracture toughness behavior in some cracked rock samples”, 5th Asian Rock Mechanics Symposium (ARMS 2008), the 2008 ISRM-Sponsored International Symposium, Tehran, Iran.
 

61.  Ayatollahi, M.R., Aliha, M.R.M, Pakzad, R. (2008), “Determination of shear fracture resistance of rocks”, 5th Asian Rock Mechanics Symposium (ARMS 2008), the 2008 ISRM-Sponsored International Symposium, Tehran, Iran.
 

62.  Aliha, M.R.M., Ayatollahi, M.R., Kharazi, B. (2008), “Mixed mode I/II crack growth assessment for dehbid marble”, 5th Asian Rock Mechanics Symposium (ARMS 2008), the 2008 ISRM-Sponsored International Symposium, Tehran, Iran.
 

63.  Aliha, M.R.M., Ayatollahi, M.R. (2008), “Using centrally cracked ring specimen for investigating mixed mode fracture toughness of rocks”, 42nd US Rock Mechanics Symposium and 2nd U.S.-Canada Rock Mechanics Symposium, San Francisco, USA.
 

64. Ayatollahi, M.R., Aliha, M.R.M., Aghili, S.M., (2008), “A new tension-shear cracked specimen for mixed mode fracture toughness experiments” Proceedings of the 16th International ISME Conference, Kerman, Iran
 

65. Ayatollahi, M.R., Pakzaad, R., Aliha, M.R.M., (2008) “Numerical analysis of a new test configuration for mixed mode I/II fracture studies in rocks and concrete materials”. 4th National Civil Engineering Conference, Tehran, Iran.
 

66. Ayatollahi, M.R., Saghafi, H., Aliha, M.R.M., (2008) “3D finite element analysis of edge cracked semi disc specimen under bend loading”. 4th National Civil Engineering Conference, Tehran, Iran.
 

67. Aliha, M.R.M., Ahmadi, B., Ayatollahi, M.R.,(2008), “On the influence of carbon nanotubes on fracture toughness of epoxy resin” Proceedings of the 1st Iranian conference on applications of nanotechnology in engineering and medical Science, Mashhad, Iran
 

68. Aliha, M.R.M., Ayatollahi, M.R., Kharrazi, B. (2008). “Numerical and Experimental Investigation of Mixed Mode Fracture in Granite Using Four Point Bend” The first African Inter Quadrennial ICF conference (AIQ-ICF), , Algiers, Algeria
 

69. Aliha, M.R.M., Ayatollahi, M.R., mousavi, S. (2008). “Confining pressure effects on stress intensity factors – A 3D finite element analysis” The first African Inter Quadrennial ICF conference (AIQ-ICF), Algiers, Algeria.
 

70. Aliha, M.R.M., Ayatollahi, M.R., Khademi, S. (2007), “Rock tensile strength test using disc type samples -An investigation on sub-sized specimens” Engineering Structural Integrity: research, development and applications (ESIA 9), Beijing, China.
 

71. Ayatollahi, M.R., Aliha, M.R.M., (2007), “Crack growth prediction in a graphite sample under mixed mode loading” Engineering Structural Integrity: research, development and applications (ESIA 9), Beijing, China.
 

72. Aliha, M.R.M., Ayatollahi, M.R., (2007) “Experimental evaluation of mixed mode I/II fracture toughness in Perspex”. ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran
 

73. Aliha, M.R.M., Ayatollahi, M.R., (2007), “Cracked disc specimen with center hole for fracture investigation in rock materials” Proceedings of the 3rd Iranian Rock Mechanics Conference, Tehran, Iran.
 

74. Aliha, M.R.M., Ayatollahi, M.R., (2007), “Fracture resistance of a synthetic rock subjected to combined mode I-II loading” Proceedings of the 3rd Iranian Rock Mechanics Conference, Tehran, Iran
 

75. Khademi, S., Ayatollahi, Aliha, M.R.M., (2007), “Finite element analysis of twotest configurations for determining tensile strength of rocks ” Proceedings of the 3rd Iranian Rock Mechanics Conference, Tehran, Iran
 

76.  Aliha, M.R.M., Ayatollahi, M.R., (2007) “A fracture mechanics approach for analyzing spiral weld pipes containing crack” First Iranian Pipe and Pipeline Conference, Tehran, Iran
 

77. Ayatollahi, M.R., Akbardoost, J., Aliha, M.R.M., (2007) “Strength evaluation of oil and gas pipes under external explosive loading” First Iranian Pipe and Pipeline Conference, Tehran, Iran.
 

78. Aliha, M.R.M., Ayatollahi, M.R (2007) “Combined mode fracture toughness assessment for a high strength cement mortar” 7th International Conference on Damage Assessment of Structures (DAMAS 2007), Torino, Italy.
 

79. Aliha, M.R.M., Ayatollahi, M.R., Ashtari, R. (2007) “Experimental fracture investigation in cracked marble samples” Proceedings of the 3rd National Civil Engineering Conference, Tabriz, Iran.
 

80. Ayatollahi, M.R., Aliha, M.R.M. and Khademi, S. (2007) “Determination of rock tensile strength by means of disc type specimens” Proceedings of the 15th  International ISME Conference, Tehran, Iran
 

81. Ayatollahi, M.R., and Aliha, M.R.M. (2006) “ Theoretical predictions of mixed mode I/II fracture toughness data for a soft rock” Proceedings of the 16th European Conference on Fracture- ECF16, Greece.
 

82. Ayatollahi, M.R., Aliha, M.R.M and Poursaeedi, E (2006) “Failure evaluation of a fractured turbine shaft in a gas power plant using finite element analysis” Proceedings of the 10th International ISME Conference, Isfahan, Iran.
 

83. Aliha, M.R.M and Ayatollahi, M.R. (2006) “A theoretical investigation of hydraulic fracturing in horizontal wells using fracture mechanics approach” 1st Iranian petroleum Engineering Congress, Tehran, Iran.
 

84. Ayatollahi, M.R., Aliha, M.R.M and Takaffoli, M. (2006) “Application of fracture mechanics for determination of in-situ stresses during hydraulic fracturing process” 1st Iranian petroleum Engineering Congress, Tehran, Iran.
 

85. Aliha, M.R.M and Ayatollahi, M.R., (2005) “Applications of fracture mechanics in rock cutting processes in drilling operation” Iranian Drilling Conference, Arak, Iran. (in Persian)
 

86.  Ayatollahi, M.R., Aliha, M.R.M. (2004) “Fracture Initiation angle in the centrally cracked circular disk specimen” Proceedings of the 15th European Conference on Fracture- ECF15, Stockholm, Sweden.
 

87. Ayatollahi, M.R., Aliniaziazi, A. and Aliha, M.R.M. (2003) “Stress intensity factors for a weld toe crack in a tubular joint” Proceedings of 6th International Conference on Civil Engineering (ICCE 2003), Isfahan, Iran, Vol. 6, PP 361- 366.

آثار علمی برگزیده در جشنواره های علمی داخلی و بین المللی

• چاپ دو مقاله ژورنال در Elsevier به عنوام مقالات برتر سالهای 2006 و 2009.

مشارکت در طرح های تحقیقاتی

• بررسی رفتار رشد ترک در آسفالت تحت بارهای ترکیبی کششی- برشی حاصل از عبور وسائط نقلیه- کارفرما پژوهشکده حمل و نقل وزارت راه و ترابری (پروژه در حال اجرا)

• بررسی رفتار شکست مود ترکیبی مواد سنگی – کارفرما موسسه EPSRC و دانشگاه بریستول کشور انگلستان، سال 2008-2009

• آنالیز واماندگی شفت توربین نیروگاه گازی ری- کارفرما شرکت تعمیرات نیروگاهی ایران، سال2004-2005

افتخارات کسب شده

• کسب بورسیه تحقیقاتی از دانشگاه بریستول انگلستان برای انجام یک پروژه مشترک با آن دانشگاه

• کسب عنوان پایان نامه برتر در مقطع دکتری از سوی انجمن مهندسان مکانیک ایران در سال 1388

• پژوهشگر برتر دانشگاه علم و صنعت ایران در سال 1388

• پژوهشگر برتر دانشکده مهندسی مکانیک دانشگاه علم و صنعت ایران در سال 1388

• دانشجوی ممتاز دانشگاه علم و صنعت ایران در سالهای 1384، 1385، 1386و 1388

• داوری مقالات ژورنالهای معتبر بین المللی خارجی

اختراعات ملی ثبت شده

• تخمین استحکام برشی مواد در حالت بارگذاری خستگی و یکنواخت با استفاده از قطعه نیمه دیسک ترکدار

• تعیین تجربی چقرمگی شکست مود II در قطعات ترکدار با استفاده از نمونه دیسکی شکل

• قطعه ساده و جدید آزمایشگاهی برای تعیین استحکام کششی مواد سنگی

"برگشت به فهرست اعضای هیات علمی"

نشانی مطلب در وبگاه دانشکده مهندسی صنایع:
http://idea.iust.ac.ir/find-61.9898.16284.fa.html
برگشت به اصل مطلب