Selected Conference Attendance

1.Aliha, M.R.M.*, Kucheki, H. G., & Razavi, S. M. J. (2022). In-plane fracture analysis of bi-material adhesively bonded joints by using a simple bend beam specimen. 2nd Mediterranean Conference on Fracture and Structural Integrit, Italy.
 

2.Aliha, M.R.M.*, Kucheki, H. G., & Berto, F. (2022). Numerical analysis of crack initiation angles and propagation paths in adhesively bonded joints under mixed mode I/II loading using a novel test specimen. 7th International Conference on Crack Paths, Italy.
 

3.Aliha, M.R.M.*, Bagherifard, S. Akhondi, Sh, Mousavi, Ss, Mousavi A & Parsania H. (2018). Fracture and micro Structure study of Bovine bone under mixed mode I/II using a new test specimen. 22nd, European Conference on Fracture-ECF22, Serbia, Belgrad.
 

4.Aliha, M.R.M. *, Aram BAHMANI, Emanoil, LINUL, Liviu MARSAVINA, Sina Samareh MOUSAVI & Atefeh MOUSAVI (2018). Investigation of fracture initiation angle and propagation path for PUR foams under mixed mode I/III loading The 6th International Conference on Crack Paths (CP 2018), Verona, Italy.
 

5.Aliha, M.R.M.*., Filippo BERTO, Sina Samareh MOUSAVI & Atefeh MOUSAVI. (2018). Fracture path prediction in two biomaterials tested under mixed mode loading. The 6th International Conference on Crack Paths (CP 2018), Verona, Italy.
 

6. Heydari-Rarani M., Aliha, M.R.M.*, Shokrieh, M.M. Ayatollahi M.R. (2014) “Effect of thermal cycle on the fracture toughness of epoxy polymer concrete” X-Mech-2014, Tehran, Iran.
 

7.Molayem M., Aliha, M.R.M. *, Ameri M., Nowbakht Sh., Ajideh H., Earthman J.C. (2014) “An irreversible cohesive crack model for estimating the fatigue life of asphalt mixtures” X-Mech-2014, Tehran, Iran.
 

8.Aliha, M.R.M. *, Gharehbaghi H., Ghafoori Ahangar R. (2013) “Fracture study of a welded aluminum cylinder containing longitudinal crack and subjected to combined residual stress and internal pressure” 12th International Aluminum Conference- Montreal, Canada.
 

9.Aliha, M.R.M.*., Ghoreishi, S.M.N., Kosari. A.R. (2014) “On the relation between the moments of Inertia and the mass body center of a typical geo satellite and the full consumption” 13th  International Aerospace conference, Tehran, Iran.
 

10. Behbahani, H. Aliha, M.R.M.*., Fazaeli, H., Asayesh, M.R. (2013) Effect of Characteristic Specifications on Fracture Toughness of Asphalt Concrete Materials. 13th International Conference on Fracture, Beiging, China.
 

11.Aliha, M.R.M.*, Heydari-Rarani, M., Shokrieh, M.M. Ayatollahi M.R (2012) Mode I Fracture Toughness evaluation for a Glass-Fibre Reinforced Polymer Concrete using BD and SCB specimens” International Conference on Frontiers of Mechanical Engineering, Materials and Energy (ICFMEME 2012). Beijing, China.
 

12. Aliha, M.R.M.*., Ayatollahi, M.R., Noori, H. (2012) “Longitudinal residual stress computation for lap jointed welds using finite element method” National Conference on Mechanical Engineering (NCME 2012), Iran.
 

13. Behbahani, H. Aliha, M.R.M.*., Fazaeli, H., Asayesh, M.R. (2012) “Low temperature fracture behavior investigation for recycled asphalt pavements” 12th Annual International Conference on: Sustainable Construction Materials, Pavement Engineering and Infrastructure, Liverpool, UK.
 

14.Behbahani, H. Aliha, M.R.M.*, Fazaeli, H., Aghajani, S. (2013) “Experimental fracture toughness study for some modified asphalt mixtures” 8th International Conference on Road and Airfield Pavement Technology, Taiwan.
 

15.Behbahani, H. Aliha M.R.M. *, Fazaeli, H., Rezaei far, M.R., (2013) “Effect of characteristic specifications on mode I and mode II fracture toughness of asphalt concrete materials” 13th international conference on fracture, Beijing, China.
 

16. Aliha, M.R.M. *, Moradi, P. (2012) “Fracture analysis of DCDC and SCDC specimens subjected to mixed mode loading” The World Congress on Engineering 2012 (WCE 2012), London, UK.
 

17. Aliha, M.R.M.*, Mousavi, M., Ayatollahi, M.R. (2012) “Mixed mode I/II fracture path simulation in a typical jointed rock slope” The 4th International Conference on "Crack Paths" (CP 2012), Gaeta, Italy.
 

18.Ayatollahi, M.R. Aliha, M.R.M.*., Gharebaghi, H. (2012). “Finite Element Method Simulation of Pipe Welding and Residual Stresses measurements” 4th Iran Pipe Tech conference, Tehran, Iran.
 

19.Aliha, M.R.M.*, Heydari-Rarani, M., Shokrieh, M.M. Ayatollahi M.R. (2012)  Determination of fracture toughness and indirect tensile strength for a polymer concrete (PC) material using an experimental method , X-Mech-2012, Tehran, Iran.
 

20.Aliha, M.R.M.*., Ameri, M., Mansourian, A., Ayatollahi, M.R. (2012) “Finite element analysis of a new test specimen for investigating mixed mode cracks in asphalt overlayes” 7th International Conference on Cracking in Pavements, Netherland.
 

21.Aliha, M.R.M. *, Ayatollahi, M.R. 2nd Conference on Thermal Power Plants (Gas, Combined Cycles, Steam), Tehran, Iran.
 

22.Ayatollahi, M.R. Aliha, M.R.M. *, Gharebaghi, H. (2011) “ three dimensional fracture analyses of a cylindrical shell containing semi elliptical crack” 1th conference on Iranian Aircraft Structural Integrity Program, Tehran, Iran.
 

23.Ayatollahi, M.R. Aliha, M.R.M. *, Gharebaghi, H. (2011)” residual stress study of welded structures and finite element analyses of welding process in 6060-T6 aluminum alloy”1st Regional Mechanical engineering congress, RCME 2011, Tehran, Iran.
 

24.Aliha, M.R.M., Ayatollahi, M.R., Hosseinpour, GH., (2011), 4th Iranian rock mechanics conference, Tehran,Iran.
 

25.Aliha, M.R.M.*., Ayatollahi, M.R., Hosseinpour, GH., (2011), “Stability analysis and fracture path simulation of jointed rock slopes subjected to combined opening-sliding deformations” Slope stability conference2011, Vancouver-Canada
 

26. Aliha, M.R.M.,*, Ayatollahi, M.R., Heidary Khavas M. (2011), “on the influence of thickness and mechanical properties of asphalt layers on the stress intensity factors of a transverse cracked asphalt pavement” 5st Iranian asphalt conference, Tehran, Iran.
 

27.Aliha, M.R.M.*., Ayatollahi, M.R., Karimzadeh A. (2011), “Tensile strength determination of asphalt materials using semi-circular bend specimen” 5st Iranian asphalt conference, Tehran, Iran.
 

28. Aliha, M.R.M., Ayatollahi, M.R., (2011), “Mixed mode I/II brittle fracture evaluation of marble using SCB specimen “International congress on the mechanical behavior of materials (ICM11), Italy, Como.
 

29. Aliha, M.R.M.*., Rezaei, M. (2011), “Experimental and theoretical study of fracture paths in brittle cracked materials subjected to pure mode II loading” International Conference on Advances in Experimental Mechanics: Integrating Simulation and Experimentation for Validation (ISEV). 7th BSSM Conf. Edinburg, UK.
 

30. Aliha, M.R.M.*, Ayatollahi, M.R., Smith, D.J., Pavier, M.J. , (2011) “Geometry and loading effects on pure mode II fracture toughness of rock materials” 45nd US Rock Mechanics Symposium ARMA 2011, San Francisco, USA.
 

31. Aliha, M.R.M. *, Khoshdel, A, (2011) “Recent development in construction of welded gas and oil pipelines” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran.
 

32. Aliha, M.R.M.*., Ayatollahi, M.R., (2011) “Integrity assessment of cracked longitudinal seam welded pipes subjected to combined torsion-internal pressure loads” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran.
 

33. Aliha, M.R.M., Ayatollahi, M.R., (2011) “Finite element analysis of stresses and deformations induced in buried pipelines” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran.
 

34.Ayatollahi, M.R. Aliha, M.R.M., Gharebaghi, H. (2011)” Methods of Residual Stress Measurement in Welded Pipelines and FEM Simulation of Pipe Welding” 3rd Iranian pipe and pipe line conference, Iranpipetech 2011, Tehran, Iran
 

35. Ayatollahi, M.R. Hosseinpour, GH.,Aliha, M.R.M. (2010), “Using a new tensile-shear cracked specimen for investigating fracture behavior of rock materials” International conference on experimental mechanics ICEM 2010, koualalampour. Malaysia.
 

36. Ayatollahi, M.R. Aliha, M.R.M., Hosseinpour, GH., (2010), “fracture study of a test specimen for evaluating the fracture toughness of rocks”1st national conference on structure-earthquake and geo technique Babolsar, Iran.
 

37. Aliha, M.R.M., Ayatollahi, M.R., Moradi P. (2010), “Numerical analysis of mode I and mode II stress intensity factors for a new cracked specimen”3rd national conference of mechanical engineering, Isfahan, Iran.
 

38. Aliha, M.R.M., Ayatollahi, M.R., Pourkavian M.H. (2010), “Numerical analysis of hydraulic fracturing process in the wall of wellbore using the fracture mechanics approach” The 6th National Seminar on Watershed Management, Tehran, Iran.
 

39. Aliha, M.R.M., Ayatollahi, M.R., Hosseinpour, GH. (2010), “A fracture criterion for investigating the behavior of faults during the earthquake using fracture mechanics approach” First Conference on Seismology and Earthquake Geodynamics. Kerman, Iran.
 

40. Aliha, M.R.M., Ayatollahi, M.R., Hosseinpour, GH. (2010), “Numerical and experimental analysis of a new tensile – shear cracked specimen used for fracture toughness study in rocks” Tehran International Mining Congress (IMC 2010), Tehran, Iran.
 

41. Aliha, M.R.M.*, Ayatollahi, M.R., Darban, H. (2010), “Experimental investigation of crack geometry on fracture toughness of rocks using short rod specimen” First Conference on Seismology and Earthquake Geodynamics. Kerman, Iran
 

42. Ameri, M., Mansourian, A., Aliha, M.R.M., Heidary Khavas M. and Ayatollahi  M.R.  (2010), “Mixed mode deformation in a cracked asphalt pavement subjected to traffic loading” The 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), Parma, Italy.
 

43. Aliha, M.R.M., Ayatollahi, M.R. (2010), “Mechanical failure analysis of a broken turbine-compressor shaft in Rey steam powerplant”2nd Conference on Thermal Power Plants (Gas, Combined Cycles, Steam), Tehran, Iran.
 

44. Aliha, M.R.M., Ayatollahi, M.R., (2010), “Mixed mode I/II brittle fracture evaluation of marble using SCB specimen” The 9th International Conference on Multiaxial Fatigue and Fracture (ICMFF9), Parma, Italy.
 

45. Ayatollahi, M.R., Aliha, M.R.M.*, Heidary Khavas M., (2010) “ Crack growth behavior assessment of  rock materials using cracked cylindrical  specimen subjected to three-point bend loading ” 14th Geophysics Conference of Iran, Tehran 2010.
 

46. Ayatollahi, M.R., Aliha, M.R.M., Pourkavian M.H. (2010) “in situ stress investigation for prediction of earthquake using hydraulic fracturing process” 14th Geophysics Conference of Iran, Tehran 2010.
 

47. Aliha, M.R.M. *, Ayatollahi, M.R., Hosseinpour, GH., (2010) “Numerical analyses of a new specimen for obtaining fracture toughness of rocks” 14th Geophysics Conference of Iran, Tehran 2010.
 

48. Aliha, M.R.M. *., Ayatollahi, M.R., Pourkavian M.H. (2010), “Numerical analysis of hydraulic fracturing process in wellbores; A three dimensional mixed mode study” The 1st International Applied Geological Congress, IAGC 2010, Mashhad, Iran.
 

49. Ayatollahi, M.R, Aliha, M.R.M., Rezaei, M. (2010), “On crack growth path of rock materials subjected to tensile loading” The 1st International Applied Geological Congress, IAGC 2010, Mashhad, Iran.
 

50. Aliha, M.R.M. *, Ayatollahi, M.R., Smith, D.J.,  Pavier, M.J. (2009), “Mixed mode crack path investigation in a limestone rock using two circular shape samples –An experimental and theoretical study”, International conference on crack path (CP 2009), Vicenza,  Italy.
 

51. Aliha, M.R.M.*, Ayatollahi, M.R., Smith, D.J., Pavier, M.J. (2009), “Statistical fracture toughness analysis of Guiting limestone using disc shape test specimens” 12th International Conference on Fracture ICF 2009, Ottawa, Canada.
 

52. Aliha, M.R.M. *, Ayatollahi, M.R, (2009), “Crack growth resistance of alumina and zirconia ceramics under mixed mode I-II deformation” 12th International Conference on Fracture ICF 2009, Ottawa, Canada.
 

53. Ayatollahi, M.R, Aliha, M.R.M., Kharrazi, B. (2009), “Crack growth behaviour of a brittle polymer under combined tensile-shear deformation” 14th International Conference on Deformation, Yield and Fracture of Polymers, Netherland.
 

54. Aliha, M.R.M., Ayatollahi, M.R. (2009), “Fracture resistance evaluation of mortar” 8th international congress on civil engineering, Shiraz, Iran.
 

55. Ayatollahi, M.R, Aliha, M.R.M., Kharrazi, B. (2009), “On validation of anti symmetric four-point bend specimen for determining mode II fracture toughness of rocks” 12th International Conference on Fracture, ICF 2009, Ottawa, Canada.
 

56. Ayatollahi, M.R. Aliha, M.R.M., Pourkavian, M.H. (2009), “Numerical analysis of hydraulic fracturing process in wellbores-A three dimensional mixed mode study”, 6th Iranian Geology conference Ireg 2009, Tehran, Iran.
 

57. Ayatollahi, M.R, Aliha, M.R.M. *,.Rezaei, M. (2009),  “On the stability of fracture path of PMMA subjected to mode I loading” 9th International Seminar on Polymer Science and Technology, Tehran, Iran.
 

58. Aliha, M.R.M., Ayatollahi, M.R., (2009), “Strength evaluation of cracked fine grained cement materials”, The 8th international congress on civil engineering, Shiraz, Iran
 

59. Ayatollahi, M.R., Aliha, M.R.M. (2008), “Fracture toughness assessment for some brittle silicon based ceramics”, The 7th International Conference on Experimental Mechanics 2008 (ICEM 2008), NANJING, China.
 

60.  Ayatollahi, M.R., Aliha, M.R.M.(2008), “Investigation of combined opening-sliding fracture toughness behavior in some cracked rock samples”, 5th Asian Rock Mechanics Symposium (ARMS 2008), the 2008 ISRM-Sponsored International Symposium, Tehran, Iran.
 

61.  Ayatollahi, M.R., Aliha, M.R.M., Pakzad, R. (2008), “Determination of shear fracture resistance of rocks”, 5th Asian Rock Mechanics Symposium (ARMS 2008), the 2008 ISRM-Sponsored International Symposium, Tehran, Iran.
 

62.  Aliha, M.R.M.,  Ayatollahi, M.R., Kharazi, B. (2008), “Mixed mode I/II crack growth assessment for dehbid marble”, 5th Asian Rock Mechanics Symposium (ARMS 2008), the 2008 ISRM-Sponsored International Symposium, Tehran, Iran.
 

63.  Aliha, M.R.M., Ayatollahi, M.R. (2008), “Using centrally cracked ring specimen for investigating mixed mode fracture toughness of rocks”, 42nd US Rock Mechanics Symposium and 2nd U.S.-Canada Rock Mechanics Symposium, San Francisco, USA.
 

64. Ayatollahi, M.R., Aliha, M.R.M., Aghili, S.M., (2008), “A new tension-shear cracked specimen for mixed mode fracture toughness experiments” Proceedings of the 16th International ISME Conference, Kerman, Iran
 

65. Ayatollahi, M.R., Pakzaad, R., Aliha, M.R.M., (2008) “Numerical analysis of a new test configuration for mixed mode I/II fracture studies in rocks and concrete materials”. 4th National Civil Engineering Conference, Tehran, Iran.
 

66. Ayatollahi, M.R., Saghafi, H., Aliha, M.R.M., (2008) “3D finite element analysis of edge cracked semi disc specimen under bend loading”. 4th National Civil Engineering Conference, Tehran, Iran.
 

67. Aliha, M.R.M., Ahmadi, B., Ayatollahi, M.R.,(2008), “On the influence of carbon nanotubes on fracture toughness of epoxy resin” Proceedings of the 1st Iranian conference on applications of nanotechnology in engineering and medical Science, Mashhad, Iran
 

68. Aliha, M.R.M., Ayatollahi, M.R., Kharrazi, B. (2008). “Numerical and Experimental Investigation of Mixed Mode Fracture in Granite Using Four Point Bend” The first African Inter Quadrennial ICF conference (AIQ-ICF), , Algiers, Algeria
 

69. Aliha, M.R.M., Ayatollahi, M.R., mousavi, S. (2008). “Confining pressure effects on stress intensity factors – A 3D finite element analysis” The first African Inter Quadrennial ICF conference (AIQ-ICF), Algiers, Algeria.
 

70. Aliha, M.R.M., Ayatollahi, M.R., Khademi, S. (2007), “Rock tensile strength test using disc type samples -An investigation on sub-sized specimens” Engineering Structural Integrity: research, development and applications (ESIA 9), Beijing, China.
 

71. Ayatollahi, M.R., Aliha, M.R.M., (2007), “Crack growth prediction in a graphite sample under mixed mode loading” Engineering Structural Integrity: research, development and applications (ESIA 9), Beijing, China.
 

72. Aliha, M.R.M.,  Ayatollahi, M.R., (2007) “Experimental evaluation of mixed mode I/II fracture toughness in Perspex”. ISPST 8th International Seminar on Polymer Science and Technology, Tehran, Iran
 

73. Aliha, M.R.M., Ayatollahi, M.R., (2007), “Cracked disc specimen with center hole for fracture investigation in rock materials” Proceedings of the 3rd Iranian Rock Mechanics Conference, Tehran, Iran.
 

74. Aliha, M.R.M., Ayatollahi, M.R., (2007), “Fracture resistance of a synthetic rock subjected to combined mode I-II loading” Proceedings of the 3rd Iranian Rock Mechanics Conference, Tehran, Iran
 

75. Khademi, S., Ayatollahi, Aliha, M.R.M., (2007), “Finite element analysis of twotest configurations for determining tensile strength of rocks ” Proceedings of the 3rd Iranian Rock Mechanics Conference, Tehran, Iran
 

76.  Aliha, M.R.M., Ayatollahi, M.R., (2007) “A fracture mechanics approach for analyzing spiral weld pipes containing crack” First Iranian Pipe and Pipeline Conference, Tehran, Iran
 

77. Ayatollahi, M.R., Akbardoost, J., Aliha, M.R.M., (2007) “Strength evaluation of oil and gas pipes under external explosive loading” First Iranian Pipe and Pipeline Conference, Tehran, Iran.
 

78. Aliha, M.R.M., Ayatollahi, M.R (2007) “Combined mode fracture toughness assessment for a high strength cement mortar” 7th International Conference on Damage Assessment of Structures (DAMAS 2007), Torino, Italy.
 

79. Aliha, M.R.M., Ayatollahi, M.R., Ashtari, R. (2007) “Experimental fracture investigation in cracked marble samples” Proceedings of the 3rd National Civil Engineering Conference, Tabriz, Iran.
 

80. Ayatollahi, M.R., Aliha, M.R.M. and Khademi, S. (2007) “Determination of rock tensile strength by means of disc type specimens” Proceedings of the 15th  International ISME Conference, Tehran, Iran
 

81. Ayatollahi, M.R., and Aliha, M.R.M.(2006) “ Theoretical predictions of mixed mode I/II fracture toughness data for a soft rock” Proceedings of the 16th European Conference on Fracture- ECF16, Greece.
 

82. Ayatollahi, M.R., Aliha, M.R.M and Poursaeedi, E (2006) “Failure evaluation of a fractured turbine shaft in a gas power plant using finite element analysis” Proceedings of the 10th International ISME Conference, Isfahan, Iran.
 

83. Aliha, M.R.M  and Ayatollahi, M.R. (2006) “A theoretical investigation of hydraulic fracturing in horizontal wells using fracture mechanics approach” 1st Iranian petroleum Engineering Congress, Tehran, Iran.
 

84. Ayatollahi, M.R., Aliha, M.R.M and Takaffoli, M. (2006) “Application of fracture mechanics for determination of in-situ stresses during hydraulic fracturing process” 1st Iranian petroleum Engineering Congress, Tehran, Iran.
 

85. Aliha, M.R.M  and Ayatollahi, M.R., (2005) “Applications of fracture mechanics in rock cutting processes in drilling operation” Iranian Drilling Conference, Arak, Iran. (in Persian)
 

86.  Ayatollahi, M.R., Aliha, M.R.M. (2004) “Fracture Initiation angle in the centrally cracked circular disk specimen” Proceedings of the 15th European Conference on Fracture- ECF15, Stockholm, Sweden.
 

87. Ayatollahi, M.R., Aliniaziazi, A. and Aliha, M.R.M. (2003) “Stress intensity factors for a weld toe crack in a tubular joint” Proceedings of 6th International Conference on Civil Engineering (ICCE 2003), Isfahan, Iran, Vol. 6, PP 361- 366.